b2 pin egr

FlashPro questions & answers specific to the FD2 Japanese Civic Type R
Post Reply
Malikzzz
Posts: 18
Joined: Sun Jun 26, 2016 2:26 pm

b2 pin egr

Post by Malikzzz »

I have a question I also have fd2r Japan model I m going to boost my setup again previouly I had this problem b2 pin egr hondata recommend was not working is this the same reason it's not working according to some post fd2 doesn't have egr if yes kindly help me.what need to be done to control boost selonide.its a k20a .not k20z2 or any other.
User avatar
Spunkster
Site Admin
Posts: 22743
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: b2 pin egr

Post by Spunkster »

The CIvic Type R ECUs do not have that output. THis only works on US vehicles.
Malikzzz
Posts: 18
Joined: Sun Jun 26, 2016 2:26 pm

Re: b2 pin egr

Post by Malikzzz »

so on which pin I should put boost selonide
User avatar
Spunkster
Site Admin
Posts: 22743
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: b2 pin egr

Post by Spunkster »

You can't. Boost control is only available on a US ECU as it states when you open a FN2 calibration and look at the boost control options.
Malikzzz
Posts: 18
Joined: Sun Jun 26, 2016 2:26 pm

Re: b2 pin egr

Post by Malikzzz »

what are you suggest what should I do .I'm using flashpro
Malikzzz
Posts: 18
Joined: Sun Jun 26, 2016 2:26 pm

Re: b2 pin egr

Post by Malikzzz »

Spunkster wrote:You can't. Boost control is only available on a US ECU as it states when you open a FN2 calibration and look at the boost control options.
any thing which solves my issue
Malikzzz
Posts: 18
Joined: Sun Jun 26, 2016 2:26 pm

Re: b2 pin egr

Post by Malikzzz »

is any pin on ecu I can connect to control boost selonide ELD etc etc
User avatar
Spunkster
Site Admin
Posts: 22743
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: b2 pin egr

Post by Spunkster »

Spunkster wrote:You can't. Boost control is only available on a US ECU as it states when you open a FN2 calibration and look at the boost control options.
Malikzzz
Posts: 18
Joined: Sun Jun 26, 2016 2:26 pm

Re: b2 pin egr

Post by Malikzzz »

So that mean flash pro can't Handel boost for Fd2 is any thing I do or I should I buy a US version ecu or what give me the soloution
Malikzzz
Posts: 18
Joined: Sun Jun 26, 2016 2:26 pm

Re: b2 pin egr

Post by Malikzzz »

Spunkster wrote:
Spunkster wrote:You can't. Boost control is only available on a US ECU as it states when you open a FN2 calibration and look at the boost control options.
kindly keep us in ur mind too ABA-FD2 K20A IS also a clint so solve our problem
Post Reply