FlashPro manager 1.6.1 and TSX impossible to change AFR
-
- Posts: 6
- Joined: Sat Sep 21, 2013 1:29 am
FlashPro manager 1.6.1 and TSX impossible to change AFR
With FlashPro 1.6.1 it's impossible to change AFR in some points, removing/adding Fuel doesn't change anything basically. There was no such problems with Manager 1.4.5
Here is calibrations and corresponding logs.
rebuildFinal_1.fpcal original file and _2 with _3 fuel changes done.
Here is calibrations and corresponding logs.
rebuildFinal_1.fpcal original file and _2 with _3 fuel changes done.
- Attachments
-
- rebuildFinal_3.fpcal
- (17.37 KiB) Downloaded 365 times
-
- datalogFinal_2.fpdl
- (39.92 KiB) Downloaded 383 times
-
- rebuildFinal_2.fpcal
- (17.4 KiB) Downloaded 366 times
-
- datalogFinal_1.fpdl
- (46.42 KiB) Downloaded 360 times
-
- rebuildFinal_1.fpcal
- (17.38 KiB) Downloaded 385 times
Re: FlashPro manager 1.6.1 and TSX impossible to change AFR
Where exactly in the calibration are you making the changes and at what point in the datalog are you not seing a change....RPM or timestamp?
-
- Posts: 6
- Joined: Sat Sep 21, 2013 1:29 am
Re: FlashPro manager 1.6.1 and TSX impossible to change AFR
2 pointsSpunkster wrote:Where exactly in the calibration are you making the changes and at what point in the datalog are you not seing a change....RPM or timestamp?
2000 rpm
3000 rpm
check calibration fuel values (low cam) and you understand ;)
Re: FlashPro manager 1.6.1 and TSX impossible to change AFR
I do see a difference in the AF between 1 and 2 in the datalogs.
-
- Posts: 6
- Joined: Sat Sep 21, 2013 1:29 am
Re: FlashPro manager 1.6.1 and TSX impossible to change AFR
why removing fuel there is no changes ?Spunkster wrote:I do see a difference in the AF between 1 and 2 in the datalogs.
Re: FlashPro manager 1.6.1 and TSX impossible to change AFR
compare what fuel changes was done and how AFR changed.... for me it looks strange also.Spunkster wrote:I do see a difference in the AF between 1 and 2 in the datalogs.
1.5.6 and 1.6.1 Beta has problems for Acura TSX users, there was basicaly no problems with old 1.4.5 version. We want stable product and software, please fix issues.
Known as Vaikis_
Re: FlashPro manager 1.6.1 and TSX impossible to change AFR
can it be corupted MAP WOT determination preassure values as this occurs at ~2000 and ~3000 rpm ? Very similar problem with mine on 1.5.6 version.... can't change AFR in some points ( rich spots which can't be fixed by removing fuel )
Known as Vaikis_
Re: FlashPro manager 1.6.1 and TSX impossible to change AFR
Without datalogs and calibration and very specific detials it is hard to determine if there is a problem or not.
-
- Posts: 6
- Joined: Sat Sep 21, 2013 1:29 am
Re: FlashPro manager 1.6.1 and TSX impossible to change AFR
here is one example on 1.5.6 (guys you have bugs for TSX, so please fix them)Spunkster wrote:Without datalogs and calibration and very specific detials it is hard to determine if there is a problem or not.
it looks ok for you ? for me not very good !! Look at high 25 fuel table.
- Attachments
-
- dataloghighRev-1.5.fpdl
- (39.38 KiB) Downloaded 374 times
-
- high_rev1.5.fpcal
- (18.21 KiB) Downloaded 386 times
-
- dataloghighRev-1.4.fpdl
- (36.51 KiB) Downloaded 362 times
-
- dataloghighRev-1.4.fpdl
- (36.51 KiB) Downloaded 356 times
Re: FlashPro manager 1.6.1 and TSX impossible to change AFR
is there problems in WOT Lambda Adjustment tables ?
Known as Vaikis_
Re: FlashPro manager 1.6.1 and TSX impossible to change AFR
Why are your knock igntion limit tables all set to 60?
Re: FlashPro manager 1.6.1 and TSX impossible to change AFR
Why are your knock igntion limit tables all set to 60?
Re: FlashPro manager 1.6.1 and TSX impossible to change AFR
I believe he is not using them. How it's related with interesting INJ values ? You don't see any problems in these datalogs ?Spunkster wrote:Why are your knock igntion limit tables all set to 60?
Known as Vaikis_
Re: FlashPro manager 1.6.1 and TSX impossible to change AFR
I believe all problems starts when you use old calibrations which were done by older versions, so there is no normal backwards compability. If calibration was done with 1.4.5 or older you can simply open and upload it with 1.5.6 or newer version.
I did quick test with 1.5.6 - uploaded standart TSX calibration done by Hondata - INJ looked as it should, uploaded older calibration which was done with 1.4.5 - INJ looked bad.....
I did quick test with 1.5.6 - uploaded standart TSX calibration done by Hondata - INJ looked as it should, uploaded older calibration which was done with 1.4.5 - INJ looked bad.....
Known as Vaikis_