TC on RSX Problems

Max358
Posts: 15
Joined: Sat Feb 06, 2010 11:42 am

TC on RSX Problems

Post by Max358 » Sat Oct 13, 2012 10:40 am

I started writing about my problem in this topic

http://www.hondata.com/forum/viewtopic.php?f=42&t=14710

Test in TC manager (ECU command output test) helped make sure that the right comes on ELD.
But if I turn on the test over slip, the only change in the value Kmanager ELD, is this normal? I enclose a screen shot. The machine is not a standstill, the engine on idle. including tests over slip.

After I recorded datalog with slip on 1 and 2 gears. (The extension csv is not allowed, i reneme .csv to .kal)

Thanks!!!
Attachments
2-27102012.kal
(163.34 KiB) Downloaded 304 times
фотография.JPG
фотография.JPG (81.24 KiB) Viewed 9115 times
Last edited by Max358 on Sat Oct 27, 2012 11:27 am, edited 1 time in total.

User avatar
Hondata
Site Admin
Posts: 8776
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Is this enough for working Traction Control?

Post by Hondata » Sun Oct 14, 2012 3:47 pm

The default settings in KManager should work for you.
Hondata

Max358
Posts: 15
Joined: Sat Feb 06, 2010 11:42 am

Re: TC on RSX Problems

Post by Max358 » Sat Oct 27, 2012 11:29 am

I update topic, help please!

Thanks!!!

User avatar
Hondata
Site Admin
Posts: 8776
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: TC on RSX Problems

Post by Hondata » Sat Oct 27, 2012 8:58 pm

Hondata

Max358
Posts: 15
Joined: Sat Feb 06, 2010 11:42 am

Re: TC on RSX Problems

Post by Max358 » Sun Oct 28, 2012 12:23 am

Yes of course (3.2.0), the settings uploaded a new version with a laptop

kmanager should show what that other information besides ELD.V?

User avatar
Hondata
Site Admin
Posts: 8776
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: TC on RSX Problems

Post by Hondata » Sun Oct 28, 2012 11:04 am

Are you datalogging with both KPro and TC plugged into the USB?
Hondata

Max358
Posts: 15
Joined: Sat Feb 06, 2010 11:42 am

Re: TC on RSX Problems

Post by Max358 » Sun Oct 28, 2012 7:44 pm

no, only TC. do today, thanks!

Max358
Posts: 15
Joined: Sat Feb 06, 2010 11:42 am

Re: TC on RSX Problems

Post by Max358 » Mon Oct 29, 2012 9:40 am

I plugged KPro and TC plugged into the USB, Speed ​​began to show in the parameters Kmanager, the settings uploaded to ECU. But things are still did not help me.

Datalog of Kpro attached.
In Moscow cold weather now, slippery :)

Thanks!!!
Attachments
datalog kpro.kdl
(745.29 KiB) Downloaded 298 times

User avatar
Spunkster
Site Admin
Posts: 18012
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: TC on RSX Problems

Post by Spunkster » Mon Oct 29, 2012 11:10 am

YOu need to post your calibration, datalogs as well as the traction control calibration file used.

Max358
Posts: 15
Joined: Sat Feb 06, 2010 11:42 am

Re: TC on RSX Problems

Post by Max358 » Mon Oct 29, 2012 12:34 pm

I attach my firmware Kpro
And the configuration file TC (default "RSX" 2006 2006), there is almost no change settings
Attachments
2006RSX.tcc
(1.18 KiB) Downloaded 301 times
Last edited by Max358 on Wed Jun 19, 2013 4:16 am, edited 1 time in total.

User avatar
Spunkster
Site Admin
Posts: 18012
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: TC on RSX Problems

Post by Spunkster » Mon Oct 29, 2012 4:55 pm

CHeck yout TCC file, as it appears you have it set to a rear wheel drive vehicle.

Max358
Posts: 15
Joined: Sat Feb 06, 2010 11:42 am

Re: TC on RSX Problems

Post by Max358 » Mon Oct 29, 2012 8:14 pm

This is the default value for "RSX2006") Thank you! In the evening, I can check!)

Hurray!!! TC is working!!!
Hard to believe I did not notice that the selected rear-wheel drive.

You are planning fix the default setting for "RSX 2006"? If you look "Slip setup" Cornering for RSX is very similar to S2000

Very much like that would have been a settings file for my car with basic settings made ​​by experts

Max358
Posts: 15
Joined: Sat Feb 06, 2010 11:42 am

Re: TC on RSX Problems

Post by Max358 » Thu Nov 08, 2012 3:07 am

Traction Control Calibrations which I use for RSX turbo (DC5)?

What is the difference and 2006civicSC 2006civicTC? What kind of car models?

Thanks!

User avatar
Hondata
Site Admin
Posts: 8776
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: TC on RSX Problems

Post by Hondata » Thu Nov 08, 2012 10:28 am

2006SC is for a 270 hp supercharger car. 2006TC is for a 500+ hp turbocharged car.
Hondata

sass
Posts: 104
Joined: Mon Oct 06, 2008 5:07 am
Location: Evropa-Estonia-Tallinn

Re: TC on RSX Problems

Post by sass » Fri Nov 09, 2012 10:39 pm

Max358 wrote:This is the default value for "RSX2006") Thank you! In the evening, I can check!)

Hurray!!! TC is working!!!
Hard to believe I did not notice that the selected rear-wheel drive.

You are planning fix the default setting for "RSX 2006"? If you look "Slip setup" Cornering for RSX is very similar to S2000

Very much like that would have been a settings file for my car with basic settings made ​​by experts
Who is your tuner in Moscow?
Cr-v RD8+K24A2turbo+Kpro V4 prb+NPR3/6Speed+ТС+ HFS4 v3.2.
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper

Post Reply