H22A 15 psi 1000cc injectors

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
megomaniac
Posts: 53
Joined: Sun Jun 29, 2008 5:08 pm
Location: ON,Canada

Post by megomaniac » Wed Nov 18, 2009 6:09 pm

...
Last edited by megomaniac on Sun May 16, 2010 11:50 am, edited 1 time in total.
H22A4
turbo
S300

blacksi76
Posts: 130
Joined: Tue Nov 10, 2009 12:27 pm
Location: St. John's, NL, Canada

hey cardinal

Post by blacksi76 » Sun May 09, 2010 3:03 pm

Hey cardinal....Do you have MSN?? I just used the map you posted to get my car started and it worked fine....What do you have done to your car since that first map was posted in this section?? Message me....My setup is almost identical to yours.....

cs92hatch
Posts: 1
Joined: Fri May 14, 2010 3:20 pm
Location: Fairbanks AK

Post by cs92hatch » Fri May 14, 2010 3:48 pm

Hey cardinal, have you posted your 470 HP map? Would love to take a look at it..

blacksi76
Posts: 130
Joined: Tue Nov 10, 2009 12:27 pm
Location: St. John's, NL, Canada

yess

Post by blacksi76 » Sat May 15, 2010 6:12 am

Yeah, me too....I'd love to have a look at that map.....

ali hussain
Posts: 28
Joined: Tue May 11, 2010 4:13 am
Location: bahrain,middle east

hey honda lovers

Post by ali hussain » Tue Aug 31, 2010 4:48 pm

i am going to tune my 1993 civic with the h22 swap but i need yor help if anyone can i would be thankful to you
my engine:
type-s cams and cam gears
550 cc injectors
2.5" headers and collector
custom cold air intake
obd1 p13 ecu

can you help me to make it faster with more horsepower and torque for street races!!and if i can get a good calibraation for it i would be thankfull to you

after few months i am planning to install a skunk2 tuner series stage2 camshafts,skunk2 intake manifold and throttle body,skunk2 valves and valvesprings and retainers,cp 89 mm pistions,eagle connecting rods,darton mid sleeves,msd sci ignition and msd coil and spark wires,hondata heatshield intake manifold gaskate,3" custom exhaust,aluminium radiator,hasport engine mounts,hondata s300 p28 ecu so what do you think guys?
i really need your advises
Attachments
CIMG0348.JPG
CIMG0348.JPG (2.45 MiB) Viewed 11545 times
civic 1993 hatchback with h22 swap
2.5" custom headers
550cc fuel injectors
type-s camshafts
cold air intake

megomaniac
Posts: 53
Joined: Sun Jun 29, 2008 5:08 pm
Location: ON,Canada

Re: H22A 15 psi 1000cc injectors

Post by megomaniac » Wed May 25, 2011 5:38 pm

maybe if you post a bigger picture, you'll get more replys...Image
H22A4
turbo
S300

jcardinal
Posts: 7
Joined: Sat Aug 11, 2012 10:52 am

Re: H22A 15 psi 1000cc injectors

Post by jcardinal » Sat Aug 11, 2012 12:19 pm

Sorry everyone, I hadnt visited here in a long time. I'll post a 8psi and 1 bar with a lil creep map when I get off work today. For some reason I couldnt login under my original name.

jcardinal
Posts: 7
Joined: Sat Aug 11, 2012 10:52 am

Re: H22A 15 psi 1000cc injectors

Post by jcardinal » Tue Aug 14, 2012 11:04 am

Here is the 488whp tune done on my hatch via David Blundell being the tuner
Attachments
dyno final.skl
(42.46 KiB) Downloaded 779 times

jcardinal
Posts: 7
Joined: Sat Aug 11, 2012 10:52 am

Re: H22A 15 psi 1000cc injectors

Post by jcardinal » Tue Aug 14, 2012 11:05 am

And the 8psi
Attachments
8psi.skl
(43.93 KiB) Downloaded 616 times

jcardinal
Posts: 7
Joined: Sat Aug 11, 2012 10:52 am

Re: H22A 15 psi 1000cc injectors

Post by jcardinal » Wed Aug 15, 2012 5:57 pm

Setup
H22A Closed deck sleeved with La Sleeves
skunk2 tuner series springs and retainers
Skunk2 Pro 1 cams and gears
Weisco 89mm pistons
Eagle Rods
OEM bearings
Kaizenspeed balanceshaft elimination kit
Circuit Worx Oil pump gear
Precision 1000cc injectors
Eagle Fuel Rail
Stock IM/Throttle Body with the center butterfly plate removed "to help clear the TPS from upper side of the Eg hatch engine bay
M2A4 trans with OBX LSD 49/51 torque split
Driveshaft shop 3.9 axles
Avid Mounts, that I reconfigured and made solid insert bushings
Eville 140 Manifold
Ebay 30x12x2.5 intercooler with it backdoored for turbo inlet
Precision 6262E with billet compressor wheel, journal bearing
ARP's throughout the motor
Precision 50mm gate
Synapse BOV
Fuel Pressure set at 50psi
Stock crank pulley
Fererrea Valves
Bronze valve guides from KMS
KMS egr blockoff
Cranecams Fireball ignition and coil


I believe thats it. ENJOY EVERYONE

Post Reply