H22 turbo passed emisssions

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
megomaniac
Posts: 53
Joined: Sun Jun 29, 2008 5:08 pm
Location: ON,Canada

H22 turbo passed emisssions

Post by megomaniac »

walbro 255
id1000
.82ar 67mm t3
3inch down, ceramiac high flow no name cat,
vibrant ultra quiet resonator, big magnaflow muffler
synapse turbo h22 manifold,
heat wrapped mani, down, and wrapped the cat too.
no egr, purge, iacv, fitv.
golden eagle im
shell 91
fresh oil
cut it really close, Nox limit 505, reading 504ppm

not tuned above 4500rpms



edit: took car for dyno tune and it locked up! oil flow to crank was plugged! fu*k you custom design performance,
so... another crank, rods, rings, align bore and hone...... and heres the map I'm on now
Attachments
download_temp july 11.skl
some dyno time and a bit of street tune, work in progress
(41.71 KiB) Downloaded 272 times
june 7 11.skl
(34.79 KiB) Downloaded 326 times
etest.s3d
datalog of etest
(1.73 MiB) Downloaded 304 times
H22A4
turbo
S300
megomaniac
Posts: 53
Joined: Sun Jun 29, 2008 5:08 pm
Location: ON,Canada

Re: H22 turbo passed emisssions

Post by megomaniac »

updated, rebuilt and running again...
H22A4
turbo
S300
Post Reply