Open loop over 5000rpm
Open loop over 5000rpm
SManager 1.4.7.0 and 1.4.8.0
Why S300 switching to open loop from 5000rpm with any MAP and TPS values?
Why S300 switching to open loop from 5000rpm with any MAP and TPS values?
B16A2
P30 ECU
Skunk2Stage2 Cams
LC1, narrowband connected to D14, wideband connected to D12
Symptoms affected with narrowband closed loop and wideband closed loop
When >5000rpm - s.trim=0
P30 ECU
Skunk2Stage2 Cams
LC1, narrowband connected to D14, wideband connected to D12
Symptoms affected with narrowband closed loop and wideband closed loop
When >5000rpm - s.trim=0
- Attachments
-
- v1.4.8.0_august.skl
- (34.57 KiB) Downloaded 216 times
-
- v1.4.8.s3d
- (2.74 MiB) Downloaded 212 times
It's my normal cruising speed and rpm. I driving my car everyday more than 5000rpm for a long time. What a difference between 3000rpm or 6000rpm to forced open loop? Why I can change maximum MAP/TPS and can't change max rpm for this???Hondata wrote:This is normal behavior. What makes you think it is not?
I have Golf GTi 1.8 turbo. That ECU always in wideband closed loop from factory. And have more than one targed voltage for it for some MAP values.
No. It's my everyday car. What a problem for 5k? I have vtec point at 6800rpm and rev.limit at 9000rpm. And driving my car more than 100ml/h at highway for a long time. It's a Honda.newsoltsc wrote:Are you always racing your car? I never reach 5k rpm when I drive unless I'm either racing; or accelerating to pass somone.
-
- Posts: 53
- Joined: Sun Jun 29, 2008 5:08 pm
- Location: ON,Canada
Stock transmission with 4.4 final gear. Max speed 220km/h @ 8500rpmmegomaniac wrote:gear ratio change? what transmission do you have?
I have a transmission with KAAZ 4.9 final gear and Carbonetics 1-5 gears for racing. Max speed 170km/h @ 8500rpm
The car worked perfectly about 5 years. I don't wont changing anything in the car. I just want true closed loop. And not understanding - why it's normal when ECU goto open loop at 5000rpm.
Re: Open loop over 5000rpm
Where did you get 1.4.8 from? i don't see a link and as far as i know 1.4.7 is latest. A link would be appreciated to post about updates.XPEHODATA wrote:SManager 1.4.7.0 and 1.4.8.0
Why S300 switching to open loop from 5000rpm with any MAP and TPS values?
thanks