FD2 PLX wideband problem

FlashPro questions & answers specific to the FD2 Japanese Civic Type R
cavilheiras
Posts: 6
Joined: Mon Feb 22, 2010 4:53 pm

Post by cavilheiras »

:roll:
civicRSA
Posts: 132
Joined: Thu Nov 12, 2009 11:29 am
Location: South Africa
Contact:

Post by civicRSA »

I am having a problem with the ELD and ECT2 inputs. I am using an AEM wideband. With a voltage offset of -0.34 the readings at idle on the guage and flashpro are the same however if the mixture is richer than 12:1 the the wideband flatlines. I have discovered that the input to the ecu does not go lower than 1V.

Anyone else have this problem?
Attachments
wot2.fpdl
(30.88 KiB) Downloaded 528 times
Malikzzz
Posts: 18
Joined: Sun Jun 26, 2016 2:26 pm

Re: FD2 PLX wideband problem

Post by Malikzzz »

I have a question I also have fd2r Japan model I m going to boost my setup again previouly I had this problem b2 pin egr hondata recommend was not working is this the same reason it's not working according to this post fd2 doesn't have egr if yes kindly help me
Post Reply