Do I need Type R pistons for ITR reflash?

Questions / support for the K-Series ECU re-flash
Post Reply
tanabersx
Posts: 5
Joined: Wed Nov 21, 2007 8:12 am

Do I need Type R pistons for ITR reflash?

Post by tanabersx »

I have read in a couple of sites that you don't need them and in other places they say you do so, I'm just asking the people that know for sure,
thanks a lot.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

It's not required.
tanabersx
Posts: 5
Joined: Wed Nov 21, 2007 8:12 am

Post by tanabersx »

will I get less performance?or will it run lean w/o the pistons?
My mods are:
DCRH, ITR intake manifold with plenum expander, Cat Back, IMG, Short Intake, ITR head
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

It won't make much of a difference.
wolf74
Posts: 5
Joined: Wed Aug 29, 2007 3:42 am

ITR Reflash RSX type S 04

Post by wolf74 »

Can we still get the ITR Reflash
I have 2005 cams, PRC manifold, ITR Headers ... and a Skunk2 megaflow 60 mm catback

not seeing the option for ITR reflash, also have there been any more tuning done to this reflash from initial offering
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

The reflash is still offered and no changes have been made to the reflash since it was originally created.
wolf74
Posts: 5
Joined: Wed Aug 29, 2007 3:42 am

Post by wolf74 »

so with my mods its a great buy to get the ITR reflash

Please indicate the Part number so I can chose the correct reflash as the website only has two reflashes.

Looking to purchase at the end of this month
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

http://www.hondata.com/kseriesecuinfoform.html

You must fill out the form and it has the Type R reflash listed there.
Post Reply