how to convert my bin from my chip (s200) to the s300 ???

ROM Editor 4 tuning software questions and answers.
User avatar
Spunkster
Site Admin
Posts: 12986
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Postby Spunkster » Fri Oct 03, 2008 3:34 pm

You will have to take it to a Hondata dealer to have them read the chip out and then upload it to the s300.

V-Spec race development
Posts: 167
Joined: Wed Aug 22, 2007 12:41 am

Postby V-Spec race development » Fri Jul 31, 2009 1:12 am

Can you tell us how do I go about doing so?

User avatar
Spunkster
Site Admin
Posts: 12986
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Postby Spunkster » Fri Jul 31, 2009 10:10 am

File, Open, locate the bin file (RE4 file if from Romeditor 4) and open it.

http://www.hondata.com/help/smanager/up ... conversion

V-Spec race development
Posts: 167
Joined: Wed Aug 22, 2007 12:41 am

Postby V-Spec race development » Sat Aug 01, 2009 12:19 am

So here's what i did: I open Smanager, went to file, open, click on the program files, romeditor 4, open my bin file w/c is 32kb and it says: "this file is not a rom image" Could not open.

User avatar
Spunkster
Site Admin
Posts: 12986
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Postby Spunkster » Mon Aug 03, 2009 10:03 am

it must be saved as an RE4 file, not a bin

V-Spec race development
Posts: 167
Joined: Wed Aug 22, 2007 12:41 am

Postby V-Spec race development » Tue Aug 04, 2009 1:13 am

Spunkster wrote:it must be saved as an RE4 file, not a bin
Oh I got ya. I'll try that and thank you.

V-Spec race development
Posts: 167
Joined: Wed Aug 22, 2007 12:41 am

Postby V-Spec race development » Thu Aug 20, 2009 8:20 am

Spunkster, can I do this vice versa?

User avatar
Spunkster
Site Admin
Posts: 12986
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Postby Spunkster » Thu Aug 20, 2009 9:47 am

It will only work when done as I have posted.


Return to “Romeditor 4 Software”