Hondata reflash for fn2 stoped working

Questions / support for the K-Series ECU re-flash
Posts: 27
Joined: Thu Mar 26, 2009 5:32 am
Location: Lihuania

Hondata reflash for fn2 stoped working

Post by walter »

Honda Civic Type-R FN2 2007y.
Hondata reflash for FN2 37820-RRB-A13 4744-152790

While fitting LSD my dealer disconnected battery. After LSD was installed ant 1-2, 3-4 syncros changed, they couldn't start car's engine because of immobilizer. I saw that green key was blinking. I ordered ECU without immobilizer, everything was ok before. Then we installed stock ECU, engine started, everything was ok. So we installed Hondata ecu back and used this instruction immobilizer status was BAN with a RED dot. Engine started! But we got check engine with check oil :(. Engine was working without VTEC beacuse of OIL warning. Oil level was good. We tried resseting ECU via battery dissconection, but nothing helped. Now I have installed stock ECU back, everything is ok, but I'm affraid of running to lean because of race manifold. Maybe You can give some advice how to fix this? Or I have to send ECU to my dealer or to HONDATA for reflash?

Thank You.
User avatar
Site Admin
Posts: 19685
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

Please check your email

only reply via email, thanks