So whats new/been tweaked 1.1.6.0 ?

s300 and SManager software questions & answers
Locked
GTMcoupe
Posts: 110
Joined: Sat Dec 10, 2005 6:39 am
Location: In a Kitcar in Oxford in the UK

So whats new/been tweaked 1.1.6.0 ?

Post by GTMcoupe »

just downloaded it,,,,,, going to have a look

but what is new as i wont find it all seeing im still a newbie :roll:

cheers

WEST
scottishpol
Posts: 40
Joined: Fri Jul 01, 2005 5:39 pm

Post by scottishpol »

Boost level per gear I think
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata »

Go to the help file and look under 'What's New'.
Hondata
GTMcoupe
Posts: 110
Joined: Sat Dec 10, 2005 6:39 am
Location: In a Kitcar in Oxford in the UK

Post by GTMcoupe »

Hondata wrote:Go to the help file and look under 'What's New'.
Cheers

I found that a little after I posted thought i had seen an update bit somewhere :lol:

Back to do a bit more tunning

WEST
jdmspecdc5
Posts: 100
Joined: Tue Jun 07, 2005 3:19 pm

Post by jdmspecdc5 »

will the additional components cost anything to install if the ecu is sent to hondata?
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

Shmaa
Posts: 58
Joined: Tue Sep 13, 2005 2:34 pm

Post by Shmaa »

So the only option is to send it in? can we purchase the parts and do it?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata »

Please, please, don't attempt to add the parts yourself unless you have successfully socketed ECUs and have the right equipement. Your dealer can get the installation kit and do the install for you.
Hondata
Shmaa
Posts: 58
Joined: Tue Sep 13, 2005 2:34 pm

Post by Shmaa »

Please e-mail me the information also, you guys have seen my work. just need to know what parts are required and where to put them.

C427@yahoo.com

edit, I see the parts, just need to know the part numbers of the transistors, is the large one a "2SD1594" ? and if the diode is regular or zener. looks like a regular

I also have a question about using the air conditioning switch to select between low boost and high boost. I could never get it to work with the launch limiter. you don't have to have the a/c installed for the ecu to see that the a/c switch is on or off do you??
kaj
Posts: 98
Joined: Mon Nov 21, 2005 4:47 pm

Post by kaj »

so i can send in my ECU and get the gear-based boost NOW? what kind of turn around time are we talking?
$50 is a hell of a lot better than buying an electronic boost controller :shock:
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

kaj
Posts: 98
Joined: Mon Nov 21, 2005 4:47 pm

Post by kaj »

kaj wrote:so i can send in my ECU and get the gear-based boost NOW?
i'll take your reply as a "yes". so, if we have a competent hondata dealer/installer to do the job, how do we order the parts? or, do we just have him do it?
Locked