Datalog Review k.retard Across 3 Cylinders

FK2 Civic Type R 2015-2017, FK8 Civic Type R 2017-2021, FL5 Civic Type R 2023+ and Integra Type S 2024+
Post Reply
jeffus
Posts: 1
Joined: Wed Jun 29, 2022 9:10 pm

Datalog Review k.retard Across 3 Cylinders

Post by jeffus »

Hi, recently flashed the 93 basemap on my 19 FK8, and was reading that k retard across multiple cylinders is something to look out for.

The attached log is a 3rd gear WOT pull to redline, after 6500 rpm there is 2 degrees of k retard on cylinder 1/2/3.

Is this an issue or is it within an acceptable range?
Attachments
3rd pull.fpdl
(1.09 MiB) Downloaded 72 times
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Datalog Review k.retard Across 3 Cylinders

Post by Spunkster »

From the help file tuning notes: https://www.hondata.com/help/flashpro/fk2_fk2_notes.htm

Knock. Changing the knock retard step table to reduce the knock retard upon a knock event helps to stop large drops in engine power from a single knock event. If there is knock retard after 5000 rpm without any sign of knock, consider changing the knock sensitivity tables.
Post Reply