Hi, please excuse my ignorance
-
- Posts: 4
- Joined: Sat May 14, 2022 1:43 pm
Hi, please excuse my ignorance
I'm wondering if my vehicle has any default base maps to use? I have a 2018 Civic Sport Touring HB. I checked the ECU # and your site said it was supported. But going through the available tunes, I see a 2017 & 2019 calibrations for The "Honda civic sport touring" but not one specifically for 2018. I see one for "2018 CVT Touring". Which would I use?
-
- Posts: 4
- Joined: Sat May 14, 2022 1:43 pm
Re: Hi, please excuse my ignorance
Suppose I should also mention that I have the CARB edition Flashpro -with that being said it it looks there would only be two maps. the 2016+ 1.5L the +3 and +6 psi maps. Is this correct?
Re: Hi, please excuse my ignorance
2017 and 2018 are the same and use the same calibrations. The CARB version will have very limited amount of calibrations as it cannot alter emissions.
-
- Posts: 4
- Joined: Sat May 14, 2022 1:43 pm
Re: Hi, please excuse my ignorance
Understood. I very much appreciate you getting back to me on this.
Just flashed the +3 psi carb map and it seems that the check engine light is persisting. And on dash it says that my automatic high beams aren't working... I tried clearing codes via flashtool but these won't go away. Is this something that will go away given some time? Please advise and thanks in advance!
Just flashed the +3 psi carb map and it seems that the check engine light is persisting. And on dash it says that my automatic high beams aren't working... I tried clearing codes via flashtool but these won't go away. Is this something that will go away given some time? Please advise and thanks in advance!
Re: Hi, please excuse my ignorance
You need to datalog and see what the actual error is that is reported.