Hello,
I have already reported the issue on below topic, but remained unanswered:
viewtopic.php?t=24949
- Honda Civic 92-95 and other
- sn: 44186 and other
- 4.5.1.0 (started on 4.4.9)
- 37820-PRA-E02 and other
- Windows 7 x64
Issue started to happen from KManager 4.4.9 on different KPRO v4 boards. When I try to start datalogging or upload to ECU, KManager hang with attached error (I have reported the error using Send Error Report). The error continues until the computer is connected to the internet.
Could you please explain why internet connection is needed to use KManager?
Thank you
KManger crashed, cant connect or upload without internet connection
KManger crashed, cant connect or upload without internet connection
- Attachments
-
- hondata-blad.jpg (3.07 MiB) Viewed 659 times
Re: KManger crashed, cant connect or upload without internet connection
With KPro before KPro4, don't download from the KPro unless you have to. Rather open the calibration on the laptop instead. Certainly you should never need to upload to the KPro and then immediately download from the KPro.
Hondata