problems with gsr and p28
-
- Posts: 4
- Joined: Sun Aug 28, 2005 1:31 pm
problems with gsr and p28
I have a 96 integra gsr and i have a few problems. I have a error code 23 for the knock sensor and i want to get rid of that. This ecu obviously cant support the knock sensor so what do i do. I also have a problem with the full throttle shift feature. When turned on it limits my rpm when my pedal is released and if i invert the input it doesnt work at all. I happen to be using the base settings for the jdm gsr would i be better off using the usdm gsr base settings . The reason i do this is i have itr pistons in my car which puts my compression up there. Any suggestions will help. Last but not least can i control my iabs with another output and a relay if i rewire the iab silonoid to a relay first.
You can use the nitrous controls for IAB control with a relay.
You must install a clutch switch for the Full throttle shift to work and always on will not workk...you m ust use on of the inputs.
Knock sensor cna be disable isn misc tab of parameters.
The calibrations there are something to begin tuning from...you need to tune on the dyno for safety and power.
You must install a clutch switch for the Full throttle shift to work and always on will not workk...you m ust use on of the inputs.
Knock sensor cna be disable isn misc tab of parameters.
The calibrations there are something to begin tuning from...you need to tune on the dyno for safety and power.
-
- Posts: 4
- Joined: Sun Aug 28, 2005 1:31 pm
-
- Posts: 4
- Joined: Sun Aug 28, 2005 1:31 pm