Engine cuts at 2000rpm

s300 and SManager software questions & answers
Post Reply
crusader13
Posts: 2
Joined: Sun Apr 14, 2019 10:45 pm

Engine cuts at 2000rpm

Post by crusader13 »

Engine fires up fine. It will run normal until the motor gets to operating temperature and then will cut fuel or ignition at 2000rpm. All sensors are new. I have tried recalibrating the tps. Gone through the timing twice. I am new to hondata. Managed to figure out the datalog process and the file is attached.

B20B
RC 370cc
255lph Walbro
S2 IM
66TB
Attachments
2000rpm stall dtalog.s3d
(2.38 MiB) Downloaded 99 times
crluver123
Posts: 155
Joined: Tue Oct 10, 2006 10:13 pm

Re: Engine cuts at 2000rpm

Post by crluver123 »

TPS isn't working. it's staying at 0% for the entire datalog.
crusader13
Posts: 2
Joined: Sun Apr 14, 2019 10:45 pm

Re: Engine cuts at 2000rpm

Post by crusader13 »

Switched the TPS out for the old unit and it seems to have fixed my issue. Thank you.
Post Reply