S300 v3 no soild green light

s300 and SManager software questions & answers
Post Reply
H22kkiller
Posts: 5
Joined: Mon Apr 29, 2019 4:06 pm

S300 v3 no soild green light

Post by H22kkiller »

Whats up everyone so im having issues with my s300 v3. So i just socketed and chipped 2 ecu's for the v3 one being a p28 and the other being a p72, now when i plug the ecu's in the cars they belong to i get no soild green light next to the usb port i get the soild green up in the right corner and the red flashing light at d1 but no green at d2 and i get no dataloging on my laptop for either ecu. Im stumped please help
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: S300 v3 no soild green light

Post by Spunkster »

Has J12 been cut?
H22kkiller
Posts: 5
Joined: Mon Apr 29, 2019 4:06 pm

Re: S300 v3 no soild green light

Post by H22kkiller »

Yes i have cut j12
H22kkiller
Posts: 5
Joined: Mon Apr 29, 2019 4:06 pm

Re: S300 v3 no soild green light

Post by H22kkiller »

Spunkster wrote: Tue Apr 30, 2019 9:45 am Has J12 been cut?
Yes i have cut j12
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: S300 v3 no soild green light

Post by Spunkster »

Post a picture up close and in focus showing the bottom of the ECU where the soldering has been done.
H22kkiller
Posts: 5
Joined: Mon Apr 29, 2019 4:06 pm

Re: S300 v3 no soild green light

Post by H22kkiller »

Spunkster wrote: Tue Apr 30, 2019 5:02 pm Post a picture up close and in focus showing the bottom of the ECU where the soldering has been done.
Attachments
155666974988459106006759956300.jpg
155666974988459106006759956300.jpg (4.76 MiB) Viewed 2497 times
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: S300 v3 no soild green light

Post by Spunkster »

The problem is the socketing. It looks like you have a number of cold solder joints or the through hole plating is damaged and it is not making proper contact.
Post Reply