Setting idle speed and max rpm
Re: Setting idle speed and max rpm
Haha that makes sense for the idle issue then - i was under the impression Smanager could still control this idle rpm without the IAC, obviously not with your response.
Re: Setting idle speed and max rpm
Smanager-Parameters-Rev Limits-speed limiter
Under the above location there is a maximum rprm setting.
I have tried setting the rpm to something like 6000rpm to prove it works but it climbs way past this until i let off throttle
-
- Posts: 155
- Joined: Tue Oct 10, 2006 10:13 pm
Re: Setting idle speed and max rpm
that is not the rev limiter. that is only used for the speed limiter.
the rev limiter is labelled rev limiter, at the top under that same tab.
Re: Setting idle speed and max rpm
But that setting is in SManager, which we already determined you shouldn't be playing with...
Notice how it's in the box clearly labeled "speed limiter". And the first of the 3 boxes is labeled "Rev Limiter".
Ok, let's recap what we learned!!
1) idle air control, controls idle
2) speed limiter, limits speed
3) Rev limiter, limits revs
4) alt+ F4 will close SManager and save your engine from damage.
-
- Posts: 155
- Joined: Tue Oct 10, 2006 10:13 pm