Engine misfire

Civic 2016+ 1.5 Turbo
liaoyuan12580
Posts: 24
Joined: Fri Feb 22, 2019 5:02 am

Engine misfire

Post by liaoyuan12580 »

I use + 6psi program. When the weather is very cold. Engine temperature is very low. My Engine misfire. I asked for help. Thank you very much.
User avatar
Spunkster
Site Admin
Posts: 22742
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Engine misfire

Post by Spunkster »

Can you post your calibration as well as a datalog showing the problem?
liaoyuan12580
Posts: 24
Joined: Fri Feb 22, 2019 5:02 am

Re: Engine misfire

Post by liaoyuan12580 »

Spunkster wrote: Fri Feb 22, 2019 10:46 am Can you post your calibration as well as a datalog showing the problem?
I don't have any fault codes.
liaoyuan12580
Posts: 24
Joined: Fri Feb 22, 2019 5:02 am

Re: Engine misfire

Post by liaoyuan12580 »

Spunkster wrote: Fri Feb 22, 2019 10:46 am Can you post your calibration as well as a datalog showing the problem?
It lost power and I had to restart it.
ElpacoSV
Posts: 23
Joined: Tue Jan 22, 2019 6:41 pm

Re: Engine misfire

Post by ElpacoSV »

Hi everyone, I'm getting the same issue. I'm running the +6base map as well. I only use Shell 91. I tried getting back to stock to see if it was Hondata issue and...I got the misfire code as well.

What I notice is that is only when is cold and humid...I check spark plugs and coils and they are fine. Injection perhaps? How long of data acquisition do you need?
User avatar
Spunkster
Site Admin
Posts: 22742
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Engine misfire

Post by Spunkster »

long enough to show the issue
ElpacoSV
Posts: 23
Joined: Tue Jan 22, 2019 6:41 pm

Re: Engine misfire

Post by ElpacoSV »

data is available: https://we.tl/t-NyzoCr1BZC

let me konow if you have it!
ElpacoSV
Posts: 23
Joined: Tue Jan 22, 2019 6:41 pm

Re: Engine misfire

Post by ElpacoSV »

Any news?
Syntek
Posts: 14
Joined: Mon Jan 09, 2017 5:17 pm

Re: Engine misfire

Post by Syntek »

Hi guys,

Had a similar issue in cold environments. Have a read:

https://www.civicx.com/threads/p0301-mi ... r-1.14271/


TL;DR, had faulty injectors and had them warrantied out.
User avatar
Spunkster
Site Admin
Posts: 22742
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Engine misfire

Post by Spunkster »

Can you please attach your calibration and a Datalog to your post here?
ElpacoSV
Posts: 23
Joined: Tue Jan 22, 2019 6:41 pm

Re: Engine misfire

Post by ElpacoSV »

Already did :-) datalog can be accessed by WeTransfer. File is too large to be attached here.
User avatar
Spunkster
Site Admin
Posts: 22742
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Engine misfire

Post by Spunkster »

You can trim the Datalog down to make it much shorter and much smaller file by right clicking and selecting a start and end point then saving the Datalog with a new name. You must also include the calibration. Please post them here.
ElpacoSV
Posts: 23
Joined: Tue Jan 22, 2019 6:41 pm

Re: Engine misfire

Post by ElpacoSV »

hope this help. I'm using calibration Hatch Manual, but my car is a Sport Manual. I don't know if this can affect anything...
Attachments
datalog0000.fpdl
(1.25 MiB) Downloaded 153 times
User avatar
Spunkster
Site Admin
Posts: 22742
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Engine misfire

Post by Spunkster »

Please post the calibration used to record the Datalog.
ElpacoSV
Posts: 23
Joined: Tue Jan 22, 2019 6:41 pm

Re: Engine misfire

Post by ElpacoSV »

2017 civic Hatch MT +6PSI high octane
Rev hang = OFF
Post Reply