K20A2 EP3 European ITB base calibration question

K-Series Programmable ECU Calibration updates / downloads
Post Reply
WillP
Posts: 23
Joined: Wed Jan 23, 2019 5:28 am

K20A2 EP3 European ITB base calibration question

Post by WillP »

Hi,

I will be working on a EP3 K20A2 I am fitting ITB's.


Hardware

ITB's
310 cc injectors
Full manifold back exhaust system with decat
Stock cams

Are the base calibrations with KManager ok to work from with ITB or can a ITB base calibration be supplied to me at all?


Kind regards
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: K20A2 EP3 European ITB base calibration question

Post by Spunkster »

What ECU are you using?
WillP
Posts: 23
Joined: Wed Jan 23, 2019 5:28 am

Re: K20A2 EP3 European ITB base calibration question

Post by WillP »

Kpro V4
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: K20A2 EP3 European ITB base calibration question

Post by Spunkster »

What is the part number of the ECU you are using with the K-Pro?
WillP
Posts: 23
Joined: Wed Jan 23, 2019 5:28 am

Re: K20A2 EP3 European ITB base calibration question

Post by WillP »

Hi,

Just to follow this up, the ITB's fell through so this one can be closed.

Thanks!
Post Reply