Blinking red light
-
- Posts: 3
- Joined: Tue Mar 27, 2018 12:38 am
Blinking red light
My hondata will not let me upload any tunes to the ECU. It says online but it won’t let me do anything with it. Please help
- Attachments
-
- 0E175C0D-D9C2-4B65-AA4A-C6EDE4422BC4.jpeg (2.85 MiB) Viewed 4331 times
Re: Blinking red light
What is the serial number that is on the s300 board inside the ECU?
From Help, About, what is the version of software you are using?
From Help, About, what is the version of software you are using?
-
- Posts: 3
- Joined: Tue Mar 27, 2018 12:38 am
Re: Blinking red light
42451 is the number on the board.
I have S300 v3 and I deleted and reinstalled smanager to make sure I had the latest version.
I have S300 v3 and I deleted and reinstalled smanager to make sure I had the latest version.
Re: Blinking red light
But if you go to the Help menu and click on about, what is the actual version of software you are using?
-
- Posts: 3
- Joined: Tue Mar 27, 2018 12:38 am
Re: Blinking red light
I will check it in the morning and get back with you soon as I get home from work.
Re: Blinking red light
Hello im having issue my self i plug hondata to just laptop and get a flashing red light but it worked one time befor witha diff laptop and im using newest firmware 2.6.7.0
Re: Blinking red light
What is the serial number that is on the s300 board inside the ECU?
Re: Blinking red light
The serial number is 45812
Re: Blinking red light
A known turner here in florida installed it for me and put a base map for f20b stock motor and plugged it to car to show me it worked since then i just had it sitting in my closet untill yesterday i connected it to laptop to put stock d16 base map it just stays flashing red i click on the new calibration and click on d16 and click ok and doesnt do anything i go to calibration it shows its stored but nothing ever popped up ...so i connected ecu in car with laptop today and same shows me its connected car trys starting but starts rough then dies out i get a solid green with red flashing light this time
Re: Blinking red light
From what you have said you have not actually uploaded to the ECU. With the calibration open you must click on the upload button at the top(up arrow).
Re: Blinking red light
Ive teied and nothing pops up the upload doesnt doesnt become bold to click on it ive hit f10 to see if upload pops up but still nothing
Re: Blinking red light
Who socketed this ECU?
-
- Posts: 2
- Joined: Mon May 02, 2022 5:47 pm
Re: Blinking red light
what did you do to fix the issue i just received my ecu back and it wont upload calibration and it keeps blinking dem red light. car wont start