Serial number is 45157
Sowftware version is 2.6.7
S300 red flashing light, and cant upload map
Re: S300 red flashing light, and cant upload map
Also i plugged it into the car and turn the key and the LEDs on the board dont turn on oy if i plug it i to the ecu
Re: S300 red flashing light, and cant upload map
Who socketed this ecu?
Re: S300 red flashing light, and cant upload map
It got socketed at a computer place
Re: S300 red flashing light, and cant upload map
Was it tested when it was socketed and was it working then?
Re: S300 red flashing light, and cant upload map
No they only socketed the ecu
Re: S300 red flashing light, and cant upload map
It sounds like it may be a socketing issue. Was J12 cut in the ECU?
Re: S300 red flashing light, and cant upload map
Yes j12 was removed i bought another ecu and socketed it again and does the same thing.. is it normal for it to stay green at the top right corner Then flashing red at the bottom?
Re: S300 red flashing light, and cant upload map
Without the USB plugged in and it plugged into the car what lights show when you turn the key to the on position?