Help - B16A camshaft adjustment

Post your non-Hondata questions / problems here.
Locked
BoldJason
Posts: 4
Joined: Tue Mar 28, 2006 2:46 am
Location: Atlanta Georgia
Contact:

Help - B16A camshaft adjustment

Post by BoldJason »

I have a 89 CRX with Skunk2 stage2 cams and skunk2 pro series adjustable cam gears. What would be the best setting ? How many degrees ?

Clutch
Posts: 54
Joined: Wed Nov 17, 2004 6:03 pm
Location: Tennessee

Post by Clutch »

You need to put it on a dyno to have them set for your engine combination.

BoldJason
Posts: 4
Joined: Tue Mar 28, 2006 2:46 am
Location: Atlanta Georgia
Contact:

Yea

Post by BoldJason »

Clutch wrote:You need to put it on a dyno to have them set for your engine combination.
Yea I know that but for some reason it don't sound quit right I was really looking to see if any one else had this problem. I know Idle you have to give a littel but i can't get it to idle less than 1200 with out stumbling and quiting!

scottishpol
Posts: 40
Joined: Fri Jul 01, 2005 5:39 pm

Post by scottishpol »

You will have to properly tune the idle region, I have s2s2 on a b16a2 with pct pistons and I have managed to get a a rock solid idle at 800rpm. I would consider it to be better than stock.
My cams are set at 0-0 with a vtec switch @ 6000rpm. Not had time to set it up on the dyno yet.

Locked