Fuel Economy

Civic 2016+ 1.5 Turbo
Post Reply
User avatar
Hondata
Site Admin
Posts: 8686
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Fuel Economy

Post by Hondata » Thu Mar 30, 2017 1:43 pm

With the FlashPro if your fuel economy has decreased, make sure you have FlashProManager 2.6.4 and higher, and uncheck this (under closed loop):
civic-afm-wot.png
civic-afm-wot.png (1.59 KiB) Viewed 5000 times
If checked the ECU will switch to WOT (high load operation) sooner, which might give better response but your fuel economy will suffer.
Hondata

janemar
Posts: 59
Joined: Sun Sep 17, 2017 4:24 am

Re: Fuel Economy

Post by janemar » Sun Sep 17, 2017 4:31 pm

Is it possible at econ mode, this is uncheck?
...And checked when econ is off.

Thanks!

janemar
Posts: 59
Joined: Sun Sep 17, 2017 4:24 am

Re: Fuel Economy

Post by janemar » Thu Nov 02, 2017 8:19 am

Hi Hondata team,

Would like to follow up on this one.

Would it be that hard to program say at the following modes (SPORTS / NON-ECO / +R) for the new gen turbo engines, we have an option to enable/disable it.

Simple logic, we what this unchecked when we are out chilling and cruising to save gas. On sporty modes, we need this enabled for better throttle response and faster transition/acceleration.

Thanks!

User avatar
Hondata
Site Admin
Posts: 8686
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Fuel Economy

Post by Hondata » Mon Nov 06, 2017 7:34 am

You already have this option with the Eco or Sport button.
Hondata

janemar
Posts: 59
Joined: Sun Sep 17, 2017 4:24 am

Re: Fuel Economy

Post by janemar » Mon Nov 13, 2017 7:59 am

Hondata wrote:
Mon Nov 06, 2017 7:34 am
You already have this option with the Eco or Sport button.
Hi,

Does that mean, by default...

In ECO/non sport mode - this is unchecked?

With ECO OFF / Sport mode engage / +R mode engage(once flashpro is released to type R) - this is checked?

User avatar
Spunkster
Site Admin
Posts: 17756
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Fuel Economy

Post by Spunkster » Mon Nov 13, 2017 10:36 am

Details on this can be found in the help file: https://www.hondata.com/help/flashpro/h ... ghtsub=eco

janemar
Posts: 59
Joined: Sun Sep 17, 2017 4:24 am

Re: Fuel Economy

Post by janemar » Mon Nov 13, 2017 10:54 am

Hi,

Thanks for the link, BUT;

Im specifically asking if "use AFM to determine WOT" will be virtually, by default in the program, checked or unchecked in ECO mode ON or OFF, vice versa.

User avatar
Spunkster
Site Admin
Posts: 17756
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Fuel Economy

Post by Spunkster » Mon Nov 13, 2017 4:14 pm

That parameter is not tied to ECO mode at all.

janemar
Posts: 59
Joined: Sun Sep 17, 2017 4:24 am

Re: Fuel Economy

Post by janemar » Mon Nov 13, 2017 10:11 pm

Spunkster wrote:
Mon Nov 13, 2017 4:14 pm
That parameter is not tied to ECO mode at all.
Copy. Thanks sir!

liaoyuan12580
Posts: 24
Joined: Fri Feb 22, 2019 5:02 am

Re: Fuel Economy

Post by liaoyuan12580 » Fri Feb 22, 2019 7:25 am

I don't see any difference

Salvador Rivera
Posts: 5
Joined: Tue Apr 10, 2018 6:33 pm

Re: Fuel Economy

Post by Salvador Rivera » Mon Apr 01, 2019 8:45 pm

we have to Select Determinate by wot or don´t select the icon

Post Reply