Shifting from 1st to 2nd gear with Reflash basemap

2012+ US/Canadian Civic Si / 2013+ ILX
Post Reply
teddytao18
Posts: 4
Joined: Wed Aug 10, 2016 6:02 pm

Shifting from 1st to 2nd gear with Reflash basemap

Post by teddytao18 »

I am currently using the Reflash basemap in Flashpro manager, without changing any parameters. I noticed that when I shifted from 1st to 2nd gear at 7000+ rpm, there was a pause of power if the rpm did not drop to 4500. It seems that the rpm first dropped quickly to 4500, and then the car pulled forward, even with full throttle on the whole time. My thought is that with VSA on, there is some sort of protection. However, this never happened to the stock ECU with VSA on. If I released the clutch from 1st to 2nd shift very quick with the stock ECU, there would be a slight wheel spin instead of the pause of power. Does someone know how to remove the "pause of power" feature?
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Shifting from 1st to 2nd gear with Reflash basemap

Post by Spunkster »

What has been changed on the car?
teddytao18
Posts: 4
Joined: Wed Aug 10, 2016 6:02 pm

Re: Shifting from 1st to 2nd gear with Reflash basemap

Post by teddytao18 »

Spunkster wrote:What has been changed on the car?
It is stock.
Post Reply