have some problem with TC in a Civic FD2. Short story:
wired TC ( Active sensors, ELD )
installed drivers, Manager..
uploaded calibration, Updated FP to 1.4.5..
In FP, TC input set to ELD, Upload cal/rom..
TC seems to work, but now cant turn off , and the car lost half of its power.
tried almost everything to turn off..
TC input -> none
retard values to '0'
removed TC, ELD wire back to original state.
upload 3 different cal/rom ( original , 2 tuned )
uninstalled all TC, FP drivers, programs, reinstall new FP145..
uploaded new rom, still have the problem..
if i push full throttle the ecu retards the ignition downt to 0, -2 degree..
heres a log:
any idea?
Thanks
FD2 and TC
FD2 and TC
- Attachments
-
- FD2.fpdl
- (18.59 KiB) Downloaded 482 times
Re: FD2 and TC
You will need to also post the calibration this datalog was made with.
Re: FD2 and TC
made the same with all cal..
LOG made with wegry6
LOG made with wegry6
- Attachments
-
- wegry6.fpcal
- (11.16 KiB) Downloaded 461 times
-
- FD2KNO.fpcal
- (10.96 KiB) Downloaded 468 times
-
- fd2 wegry2.fpcal
- (11.09 KiB) Downloaded 427 times
-
- Civic-Si-RRC-1.fpcal
- (1.06 KiB) Downloaded 422 times