I have a 2007 FN2 & am fitting the TC
My workshop manual wiring diagram for the ABS is different from the wiring in my car from left to right the first 3 pairs are the same but the last (red & white) is different can someone help me please as to what wire is what
ABS wiring FN2
Re: ABS wiring FN2
Be careful because Red/white are colors used in the CAN bus, which is also a twisted pair, so don't tap into it before you are sure it is a wheel speed sensor.
My guess would be:
Blue/Green = RR
Yellow/Red = LR
Green/Red = RF
So trace the LF ABS wiring and see what color it is.
My guess would be:
Blue/Green = RR
Yellow/Red = LR
Green/Red = RF
So trace the LF ABS wiring and see what color it is.
Hondata
Re: ABS wiring FN2
Red/Yellow = RL
Green/Blue = RR
Green/Red = FL
Pink/Green = FR
Green/Blue = RR
Green/Red = FL
Pink/Green = FR
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Re: ABS wiring FN2
Thanks, but that does not correspond with the Euro FN2 2007 model.
To share, it is.
Red/Yellow = RL - Red
Green/Blue = RR - Green
Green/Red = FL - Green
Pink/Green = FR - Pink