Hi,
I need to connect to the CAN output of the TCS controller. Where can I get the wire terminals for the connector and the pin tool?
Terminals and pin tool for TCS connector
Re: Terminals and pin tool for TCS connector
They've changed all the part numbers, but here goes... The connector is AMP172143 (now Tyco 172143-1) The housing is 172047-2. Pins should be 1-170321-1 or 1-170291-1 or 1-170291-4 See https://www.te.com/usa-en/product-172047-2.html
Also any crimp tool will work for terminals that big.
Also any crimp tool will work for terminals that big.
Hondata
-
- Posts: 24
- Joined: Tue Nov 20, 2018 6:01 pm
Re: Terminals and pin tool for TCS connector
Thanks, ordered some from mouser.