CEL U0301 - ECM/PCM mismatch

FlashPro questions & answers specific to the 2010 CR-Z (US, Euro & Asia)
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: CEL U0301 - ECM/PCM mismatch

Post by Spunkster »

You must download the most recent software and start with a 2012 calibration.
HondaHolly
Posts: 17
Joined: Sat Jun 02, 2018 9:28 am
Location: NY, USA

Re: CEL U0301 - ECM/PCM mismatch

Post by HondaHolly »

Ok, going to try this in a few hours. Hopefully I don’t have any trouble copying the tables onto the 2012 calibration.
HondaHolly
Posts: 17
Joined: Sat Jun 02, 2018 9:28 am
Location: NY, USA

Re: CEL U0301 - ECM/PCM mismatch

Post by HondaHolly »

Still getting the same U0301 code and the same P062F; car dashboard info screen still telling me to "check transmission". Copied all tables and parameters from my old calibration file onto a brand new 2012 US CVT CRZ calibration file with the updated software. I did not drive the car around. Wouldn't think that would be necessary but I could try tomorrow.
What do we do now?
Attachments
DTCs
DTCs
6-22-18-errorafterupdate.jpg (172.84 KiB) Viewed 12515 times
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: CEL U0301 - ECM/PCM mismatch

Post by Hondata »

Can you use the 'send support information to hondata' function?
Hondata
HondaHolly
Posts: 17
Joined: Sat Jun 02, 2018 9:28 am
Location: NY, USA

Re: CEL U0301 - ECM/PCM mismatch

Post by HondaHolly »

Send Information completed. I also sent another email with the calibration file. Thank you so much for your assistance.
HondaHolly
Posts: 17
Joined: Sat Jun 02, 2018 9:28 am
Location: NY, USA

Re: CEL U0301 - ECM/PCM mismatch

Post by HondaHolly »

Would it help if I were to grab all the calibration IDs again to see if anything changed? Before updating to 3.0.9 and creating a new 2012 file, these were my IDs and the TCM didnt match:
ECM: 37805-RTW-A550
PCM: 37805-RTW-A550
TCM: 37806-RTW-3050
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: CEL U0301 - ECM/PCM mismatch

Post by Hondata »

The A550 (2011) should be the right calibration for the ECU, not the 2012 A560.
But the 3050 in the TCM should be 2011 as well and work. I'll check again on Monday.
I suspect the bottom line is if you return to stock do you get the same code? If so, the dealer needs to flash the other modules to match.
Hondata
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: CEL U0301 - ECM/PCM mismatch

Post by Hondata »

Another test is to use the 2011 calibration and then go to the Online -> Diagnostics window to look up the error codes. I'd like to see if the U0301 is generated from the PCM or TCM / MCM.
Hondata
HondaHolly
Posts: 17
Joined: Sat Jun 02, 2018 9:28 am
Location: NY, USA

Re: CEL U0301 - ECM/PCM mismatch

Post by HondaHolly »

Ok so I’ll go back to my original calibration file?
HondaHolly
Posts: 17
Joined: Sat Jun 02, 2018 9:28 am
Location: NY, USA

Re: CEL U0301 - ECM/PCM mismatch

Post by HondaHolly »

Havent been able to go back to my original tune yet and looks at DTCs. Having some kind of issue with the Flashpro recognizing the VIN. I tried removing negative terminal for battery for 5 minutes, but maybe I should try longer. Will have my boyfriend (who does all my tuning stuff usually) look at it tomorrow.

Also, curiously, I cannot switch driving modes after changing my car to the 2012 calibration. May not be related, but it is odd. I am stuck in normal mode.
Attachments
VIN Error.jpg
VIN Error.jpg (134.57 KiB) Viewed 12450 times
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: CEL U0301 - ECM/PCM mismatch

Post by Hondata »

We'll be in touch via email.
Hondata
stjimmy
Posts: 15
Joined: Thu Dec 01, 2011 4:56 am

Re: CEL U0301 - ECM/PCM mismatch

Post by stjimmy »

I am having same issue on my J55 ecu with CRZ Asia CVT 2011 map. Using 2.8.3.0 version.

Should I try latest version? Or other way to fix this U0301 issue?
stjimmy
Posts: 15
Joined: Thu Dec 01, 2011 4:56 am

Re: CEL U0301 - ECM/PCM mismatch

Post by stjimmy »

Upgraded firmware.. still showing CEL U0301. Same problem with HondaHolly.
Transmission Check lights on, Drive gear position blinking, but Mechanically working okay!
Please help.
Attachments
1.png
1.png (27.41 KiB) Viewed 11717 times
HondaHolly
Posts: 17
Joined: Sat Jun 02, 2018 9:28 am
Location: NY, USA

Re: CEL U0301 - ECM/PCM mismatch

Post by HondaHolly »

Hey guys I was having issues connecting to my ECU for a while - it was a separate issue that was causing the DLC (OBD II port) to lose power. Anyways, I was finally able to get this check engine light gone! Juan at Hondata rewrote the binary a while ago and it is in the latest Hondata Flashpro software update. He told me to start a new calibration file with this new software and copy over your tune info to the new file (charts, values etc).

Once I had the new and improved .fpcal file I flashed my ECU and all ECM/PCM and EEPROM error check engine lights are gone!

Some of you may still be having issues because updating your flashpro software is not enough. Update your software and then remake your tune in a brand new file. It takes a few minutes but luckily the Hondata software makes it very easy to copy paste the data charts and tables. Good luck!
Post Reply