Hi guys, I am experiencing knock count using CR-Z stock equivalent calibration, CRZ-Asia-1. Knock counts will be ranging from 9 to 24 knocks for 25 minute drive. If I returned it to stock ECU calibration there will be no knocks registered even for an hour drive.
Do I need to change any parameter on Flashpro base calibration in order to completely eliminate knocks just like stock ECU calibration?
Thank you in advance!
Knock count on stock equivalent calibration
Re: Knock count on stock equivalent calibration
A full return to stock will not have the ability to log knock counts, so this is not a good comparison. This sounds like just a tuning issue.