Coil Pack Retrofit
Re: Coil Pack Retrofit
If it is a competing product then please don't. I believe I have answered your question - there is no relation.
Hondata
Re: Coil Pack Retrofit
Actually, it is not a competing product since it no longer on the market. DSD/DSD-2 also can not be used with M&W Pro-14, Autronic 500R, Motec 41011 or any other aftermarket CDI controller.
I was just wondering since the designer of that system was looking for someone in the US to distribute his ignition for OEM based ECUs or to at least partner up with him.
Will the software for the CPR offer the ability to alter the ignition dwell?
FYI - YES, I am planning to purchase the CPR.
I was just wondering since the designer of that system was looking for someone in the US to distribute his ignition for OEM based ECUs or to at least partner up with him.
Will the software for the CPR offer the ability to alter the ignition dwell?
FYI - YES, I am planning to purchase the CPR.
Re: Coil Pack Retrofit
The coil packs use the same pulse from the ECU as the stock igniter, so the ignition dwell can be changed in the same way.
However, in testing I have not found any increase in spark energy from increasing the dwell over stock (but the coils do heat up faster).
However, in testing I have not found any increase in spark energy from increasing the dwell over stock (but the coils do heat up faster).
Hondata
Re: Coil Pack Retrofit
Will base timing still be adjusted by rotating the distributor? If the base firing/timing is not being controlled by the phasing of the rotor to the #1 terminal in the distributor cap, I am struggling to comprehend how to set the base timing.
Re: Coil Pack Retrofit
You still adjust base timing by adjusting the distributor. The sensors inside the distributor are what determine the timing.
Re: Coil Pack Retrofit
the plastic cap can be removed or switch to something else, because it isn't used anymore.
am i right? the idea is, to make the distributor smaller and look nicer for those, who look for a clean motor bay.
best regards Lukas
am i right? the idea is, to make the distributor smaller and look nicer for those, who look for a clean motor bay.
best regards Lukas
Re: Coil Pack Retrofit
Luke,
You are correct. I plan to make something special to clean up the engine bay. You could go nuts and do something like this:
http://honda-tech.com/showthread.php?t=2937779
You are correct. I plan to make something special to clean up the engine bay. You could go nuts and do something like this:
http://honda-tech.com/showthread.php?t=2937779
Re: Coil Pack Retrofit
that's, what i'm talking about.
nice, clean, cnc machined. that would be great and directly delivered with the coil pack ;)
best reagards Lukas
nice, clean, cnc machined. that would be great and directly delivered with the coil pack ;)
best reagards Lukas
Re: Coil Pack Retrofit
Here's my somewhat less glamorous solution to cleaning up the engine bay. Locash, if you decide you want to CNC this piece, let me know. I'll send it to you. Base for the mod is a D16Z6 distributor, so I don't know if the cap fits many applications or not. I also cut the tip off the distributor shaft where the rotor would bolt on to drop the height even more. Then I'm going with the D17 valve cover (direct bolt on for the D16Z6 and all the D16Y heads). It's still to be modded for crankcase breathing and then powder coated.
Re: Coil Pack Retrofit
Jaker, already have the multiple billet caps designed, going into production next week.. :)
Locash Racing, LLC
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing
Re: Coil Pack Retrofit
Couple quick shots of my billet solution that I will be offering with CPR orders.. :)
This car has been testing the CPR for awhile at over 800hp.
(crappy cell phone pics, apologies in advance)
This car has been testing the CPR for awhile at over 800hp.
(crappy cell phone pics, apologies in advance)
Locash Racing, LLC
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing
Re: Coil Pack Retrofit
Shipping yet?
Re: Coil Pack Retrofit
CPR's are not yet shipping. Might yet be another week or two..
Distributor covers are. :)
Distributor covers are. :)
Locash Racing, LLC
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing
Re: Coil Pack Retrofit
But, but... I want a custom low profile black or orange anodized one. I cut the end of the distributor shaft down so it is flush with the top of the upper reluctor to make the dizzy as low profile as possible.locash wrote:Distributor covers are. :)
Re: Coil Pack Retrofit
Custom is obviously right, most guys arent willing to cut their distributor shaft to make the cap smaller, lol. If we can find enough nutballs willing to do that, drop me a line and I'll see what I can do.. :)
Locash Racing, LLC
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing