how can i store stock calibration to flashpro?
-
- Posts: 6
- Joined: Fri Mar 27, 2020 9:38 pm
how can i store stock calibration to flashpro?
hey. i forgot that i was able to save 2 calibrations to the flashpro itself so i just uploaded my main tune in the first slot but for the second slot i wanted to have a stock ECU calibration but no idea on how to upload that to it.
Re: how can i store stock calibration to flashpro?
Use the 'stock equivalent' or 'factory settings' calibration.
Hondata
-
- Posts: 6
- Joined: Fri Mar 27, 2020 9:38 pm
Re: how can i store stock calibration to flashpro?
What year, model, and trans type is your car?Valkyrie743 wrote: ↑Sun May 24, 2020 9:01 pmim having a hard time finding it. all i can find is the maps provided which are either +3 or +6 configurations
-
- Posts: 6
- Joined: Fri Mar 27, 2020 9:38 pm
Re: how can i store stock calibration to flashpro?
2017 civic sport hatch cvt USA modelEFICU wrote: ↑Sun May 24, 2020 9:23 pmWhat year, model, and trans type is your car?Valkyrie743 wrote: ↑Sun May 24, 2020 9:01 pmim having a hard time finding it. all i can find is the maps provided which are either +3 or +6 configurations
Re: how can i store stock calibration to flashpro?
Unfortunately I don't see anything either. There is one for an MT car, but that won't work for you I'm sure. Hopefully the Hondata guys will chime in again and verify if there is anything for you. Sorry I couldn't help!
Re: how can i store stock calibration to flashpro?
Should be this calibration.
Many calibrations are shared between vehicles, which is why it is not appearing. We'll look at fixing that.
Many calibrations are shared between vehicles, which is why it is not appearing. We'll look at fixing that.
Hondata
-
- Posts: 6
- Joined: Fri Mar 27, 2020 9:38 pm