FlashProManager 3.2.2

FlashPro Manager software
Post Reply
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

FlashProManager 3.2.2

Post by Hondata »

FlashProManager 3.2.2 has been released.
  • FlashPro firmware updated to version 153
  • [2016+ Turbo Civic] Added support for new model 5AG-S93 - Singapore
  • [2016+ Turbo Civic] US/Canada added oil dilution updates from Honda
  • [2017 CRV] Added oil dilution updates from Honda
  • [2017+ FK8 Civic Type R] Added modifications for intakes (AEM, K&N, Mishimoto, Takeda, Eventuri & Injen)
For the 2016 CVT Civics the way Honda is doing the oil dilution updates is to reflash the transmission control module at the same time as the ECU. If you have a 2016 CVT Civic and do not have the TCM reflash from Honda then you may get a ECU/TCM error code. The error code indicates a version mismatch and does not affect the operation of the engine nor transmission. In this case contact us and we instruct you further. No models apart from the 2016 CVT Civic have the TCM update as part of the TSB procedure.

The FK8 intake modification files are all stock (ie unchanged AFM calibration) apart from the Eventuri. This is so you can select your intake and know it will measure the air flow correctly. The Eventuri under-read airflow and needed to be re-calibrated.
Hondata
zac.zavakos
Posts: 28
Joined: Fri Jun 15, 2018 2:47 am

Re: FlashProManager 3.2.2

Post by zac.zavakos »

Fast work.
Time for the dumb question that needs to be asked:
Will the updated oil dilution binaries work with vehicles that have not been updated by the dealer?

Thanks guys.
Hondata wrote: Wed Feb 13, 2019 3:31 pm FlashProManager 3.2.2 has been released.
  • FlashPro firmware updated to version 153
  • [2016+ Turbo Civic] Added support for new model 5AG-S93 - Singapore
  • [2016+ Turbo Civic] US/Canada added oil dilution updates from Honda
  • [2017 CRV] Added oil dilution updates from Honda
  • [2017+ FK8 Civic Type R] Added modifications for intakes (AEM, K&N, Mishimoto, Takeda, Eventuri & Injen)
For the 2016 CVT Civics the way Honda is doing the oil dilution updates is to reflash the transmission control module at the same time as the ECU. If you have a 2016 CVT Civic and do not have the TCM reflash from Honda then you may get a ECU/TCM error code. The error code indicates a version mismatch and does not affect the operation of the engine nor transmission. In this case contact us and we instruct you further. No models apart from the 2016 CVT Civic have the TCM update as part of the TSB procedure.

The FK8 intake modification files are all stock (ie unchanged AFM calibration) apart from the Eventuri. This is so you can select your intake and know it will measure the air flow correctly. The Eventuri under-read airflow and needed to be re-calibrated.
2021 Civic Sport Hatch MT (US)
2021 HR-V....why (US)
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager 3.2.2

Post by Hondata »

Yes, but read the part about the transmission controller for the 2016 CVT.
Hondata
yongfeel
Posts: 6
Joined: Sun Jan 13, 2019 12:21 am

Re: FlashProManager 3.2.2

Post by yongfeel »

Thanks! Just uploaded the tune.
liaoyuan12580
Posts: 24
Joined: Fri Feb 22, 2019 5:02 am

Re: FlashProManager 3.2.2

Post by liaoyuan12580 »

Hondata wrote: Wed Feb 13, 2019 3:31 pm FlashProManager 3.2.2 has been released.
  • FlashPro firmware updated to version 153
  • [2016+ Turbo Civic] Added support for new model 5AG-S93 - Singapore
  • [2016+ Turbo Civic] US/Canada added oil dilution updates from Honda
  • [2017 CRV] Added oil dilution updates from Honda
  • [2017+ FK8 Civic Type R] Added modifications for intakes (AEM, K&N, Mishimoto, Takeda, Eventuri & Injen)
For the 2016 CVT Civics the way Honda is doing the oil dilution updates is to reflash the transmission control module at the same time as the ECU. If you have a 2016 CVT Civic and do not have the TCM reflash from Honda then you may get a ECU/TCM error code. The error code indicates a version mismatch and does not affect the operation of the engine nor transmission. In this case contact us and we instruct you further. No models apart from the 2016 CVT Civic have the TCM update as part of the TSB procedure.

The FK8 intake modification files are all stock (ie unchanged AFM calibration) apart from the Eventuri. This is so you can select your intake and know it will measure the air flow correctly. The Eventuri under-read airflow and needed to be re-calibrated.
Has Honda Oil Dilution Update been added to the international version of the program?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager 3.2.2

Post by Hondata »

I do not believe that Honda has released revised calibrations for anything other than US/Canada vehicles.
Hondata
KingDeeDeede
Posts: 7
Joined: Thu Feb 21, 2019 9:58 pm

Re: FlashProManager 3.2.2

Post by KingDeeDeede »

I just got the new hondata oil dilution update but i forgot to return back to stock ecu. Will updating my ecu with one of the basemaps cause any problems? @hondata
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: FlashProManager 3.2.2

Post by Spunkster »

I should not be an issue.
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager 3.2.2

Post by Hondata »

The return to stock binaries are the oil dilution binaries.
Hondata
Post Reply