Connectivity issues

FlashPro Manager software
Post Reply
Erkdaj3rk
Posts: 2
Joined: Fri Jun 29, 2018 7:47 am

Connectivity issues

Post by Erkdaj3rk »

So it’s been a couple years since we updated the firmware on the manager. Was also looking to update the calibration.

First my connection issue. I was running a 50 ft usb with a repeater connecting to the flashpros usbs connection made to female. Plugged into the car and getting red power on flashpro and no usb connection light. Manager just sees driver. Obd2 is plugged in, double checked and took out plugged multiple times. My flashpro is an older model with no Bluetooth. Worked fine a couple of years ago.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Connectivity issues

Post by Spunkster »

Why do you have such a long cable?
Erkdaj3rk
Posts: 2
Joined: Fri Jun 29, 2018 7:47 am

Re: Connectivity issues

Post by Erkdaj3rk »

To reach the computer to car.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Connectivity issues

Post by Spunkster »

Try using a shorter cable as usb should not be longer than 16 feet maximum. Try borrowing a friends laptop to connect in the vehicle without a long cable.
Post Reply