Real time software dyno while Live Tuning!!!
Posted: Sat Nov 05, 2011 3:36 pm
I've been putting together a new software dyno over the last week that uses a direct connection to the CAN bus in my '08 S2000, and have had really good results. Due to the very high update rates, I'm able to achieve a road torque plot with the high resolution that I think is needed for a great street tune. It is particularly awesome to use it simultaneously with FlashPro in Live Tuning mode! You can watch the torque plot render as you do the WOT pull, so there's no need to download / export the FlashPro datalogs or upload anything to another application in order to see the torque plot.
However, it really seems to me that there shouldn't be a need for a separate application OR the CAN dongle that I'm using. Would it be possible to include this functionality into FlashPro Manager?
Below is a sample I just made to verify that FlashPro Manager would allow Live Tuning while also capturing WOT pulls. The purple and blue lines were runs to show changes to my midrange ignition timing.
However, it really seems to me that there shouldn't be a need for a separate application OR the CAN dongle that I'm using. Would it be possible to include this functionality into FlashPro Manager?
Below is a sample I just made to verify that FlashPro Manager would allow Live Tuning while also capturing WOT pulls. The purple and blue lines were runs to show changes to my midrange ignition timing.