Bug in 2.3.8.0 with TPlate-parameters!

FlashPro questions & answers specific to the FN2 European Civic Type R
Post Reply
User avatar
R-12914
Posts: 352
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Bug in 2.3.8.0 with TPlate-parameters!

Post by R-12914 » Thu May 12, 2016 9:08 am

Hi Hondata,

since i have installed the 2.3.8.0 on my FN2, the TPlate-parameters are resettet to standard and my changes are lost!?
Is it possible that this has to do with the change in the S2000 (DBW), which is where come with 2.3.8.0?

If i make changes in the parameters and save the edits, then Flashpro-Manager don't save the changes and reset to standard!

Please help!

Resettet to standard DBW-parameters:
StandardDBW_FN2.PNG
StandardDBW_FN2.PNG (131.06 KiB) Viewed 2015 times
BTW:
Same thing on all other vehicles (incl. S2000).
The "throttle index calculation" (only on S2000) changes be saved.
Last edited by R-12914 on Thu May 12, 2016 11:43 am, edited 1 time in total.
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E03
Flashpro: FP-SI-INT-21153
Software: 3.4.7.0
Firmware: 169

shind3
Posts: 111
Joined: Mon Jun 30, 2014 8:02 am
Location: Pittsburgh, PA

Re: Bug in 2.3.8.0 with FN2 TPlate-parameters!

Post by shind3 » Thu May 12, 2016 9:31 am

I have noticed the same thing with the S2000 version. My tuned throttle map has been reverted to stock even when I open older tuned/modified calibrations.

User avatar
R-12914
Posts: 352
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Re: Bug in 2.3.8.0 with FN2 TPlate-parameters!

Post by R-12914 » Thu May 12, 2016 9:37 am

shind3 wrote:I have noticed the same thing with the S2000 version. My tuned throttle map has been reverted to stock even when I open older tuned/modified calibrations.
Exactly!
All vehicles are affected!

BTW:
Today I was surprised, because my throttle pedal feels to sensitive and different compared to previously!
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E03
Flashpro: FP-SI-INT-21153
Software: 3.4.7.0
Firmware: 169

User avatar
R-12914
Posts: 352
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Re: Bug in 2.3.8.0 with FN2 TPlate-parameters!

Post by R-12914 » Thu May 12, 2016 11:38 am

I have switched back to 2.3.7.0 for the time being and it works like this:
works.PNG
works.PNG (132.72 KiB) Viewed 1985 times
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E03
Flashpro: FP-SI-INT-21153
Software: 3.4.7.0
Firmware: 169

Post Reply