the first problem is that the louch Control is to go from 6200 to 6500. it does not comply
the second problem is that its maximum RPM is at 8600, it is at 5000 RPM.
The third problem is that the car does not react quickly is very slow
muchas gracias
When updating to version 2.6.6.0 does not allow UPLOAD;
-
- Posts: 13
- Joined: Thu Jul 13, 2017 8:18 am
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
- Attachments
-
- Sin título.jpg (86.88 KiB) Viewed 1862 times
-
- pruena nN1.fpcal
- (17.42 KiB) Downloaded 101 times
-
- prueba 05 27-09-2017.fpdl
- (943.04 KiB) Downloaded 93 times
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
The only problem in the datalog I see is that the launch control is at 5000 rpm rather than 6500 rpm. Do you have cruise control?
Hondata
-
- Posts: 13
- Joined: Thu Jul 13, 2017 8:18 am
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
if you have cruise control, but you are not debauched
-
- Posts: 13
- Joined: Thu Jul 13, 2017 8:18 am
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
if you have a cruise control, it is not activated
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
I'm reading that as yes. In that case, switch the cruise control off and then use the up and down buttons to change the launch rpm.
Hondata
-
- Posts: 13
- Joined: Thu Jul 13, 2017 8:18 am
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
I will try and write you thanks.
Take it to a fast track to generate the fault in high RPM and to be able to send you data log
Take it to a fast track to generate the fault in high RPM and to be able to send you data log
-
- Posts: 13
- Joined: Thu Jul 13, 2017 8:18 am
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
In that case, turn off the cruise control and then use the up and down buttons to change the launch rpm. It's good, if I worked
I will try high rpm and write you
update the program review 2.8.2.0
Thank you
I will try high rpm and write you
update the program review 2.8.2.0
Thank you