Need help for custom tune with mods -- Si 2018

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
rpoitras
Posts: 8
Joined: Fri Oct 25, 2019 12:12 pm

Need help for custom tune with mods -- Si 2018

Post by rpoitras »

here is 2 of my logs at 3rd gear from 1500 to rev limiter. I told you something wrong about the basemap I was using.

This is the Hondata Base Map config (Civic Si Turbo MT 2017, high octane tuned high +9 PSI)

Here is my actual Bolt-on mods.:

AFE Twisted Steel Down-Pipe (Race Series):
- Part Number: 48-36604-HN

AFE Twisted Steel 2-1/2" Rear Down-Pipe/Mid-Pipe:
- Part Number: 48-36605

GReddy Supreme SP Exhaust 3" Cat-back with dual oval muffler with dual tips
- Part Number: 10158216

AEM Short Ram INTAKE SYSTEM
- Part Number: 21-830C

Injen FRONT MOUNT INTERCOOLER
- Part Number: FM1573i

Injen SES INTERCOOLER PIPES
- Part Number: SES1573ICP

This is it. Thanks again for your help

Roland
Attachments
datalog0001.fpdl
(67.28 KiB) Downloaded 156 times
datalog0000.fpdl
(86.79 KiB) Downloaded 150 times
Post Reply