Hello
I tried to upload the D16Z6 calibration this afternoon
The car starts, but I've an error code...
when cold, the stock idle was 1400rpm
now it's 1000
the stock (cold) A/F was 13,1
now it's 14,8
and the car rolls VERY bad, I've been scared to drive, so i didn't
The ignition seems very hard, and many mistakes make me think it's a B16 calibration (ex: rev limit: 8500 instead of 7500...)
help :roll:
P28 D16Z6 Calibration = correct ?!
-
- Posts: 18
- Joined: Wed Mar 01, 2006 7:24 am
- Location: France
P28 D16Z6 Calibration = correct ?!
'94 D16Z6 Hatch Civic from France
-
- Posts: 18
- Joined: Wed Mar 01, 2006 7:24 am
- Location: France
-
- Posts: 18
- Joined: Wed Mar 01, 2006 7:24 am
- Location: France
-
- Posts: 18
- Joined: Wed Mar 01, 2006 7:24 am
- Location: France
do you have the latest version of s300? i ran 22lbs of boost on a d16y8 daily starting from that basemap. for your idle, play with the iacv settings. you can also play with the cold start, but i find that you really do not need to. what error code do you have? make sure that the light in your s300 is green and not constant red.
"My other car is a camaro, but today I was in a hurry."