Quick simple question about a Base map for a B16A

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
OxSir
Posts: 4
Joined: Thu Mar 13, 2014 4:58 pm
Location: Guatema, Central America

Quick simple question about a Base map for a B16A

Post by OxSir »

So guys I quickly read the rules so hopefully Im asking this in the right area.... Im back in the Honda game.. I bought a Hondata S300 V3 and I want to use a fully BASE MAP factory oem p30 one... so I did my research and find out that by just going to "New Calibration" and selecting the JDM P30 will do... so my dumb question is... thats a Map to start from witch means you still have to work on it... or is as base as a normal P30.. reason why well I have no mods at all so fro the moment is pointless to run anything higher... Thanks and Good Night Washington !!!!
Life is to short to run without BOOST !!!!!
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Quick simple question about a Base map for a B16A

Post by Spunkster »

Yes that is the equivalent of a factory P30 calibration, but may still require tuning based on how it runs in your vehicle.
OxSir
Posts: 4
Joined: Thu Mar 13, 2014 4:58 pm
Location: Guatema, Central America

Re: Quick simple question about a Base map for a B16A

Post by OxSir »

Alright sounds good bro !!! thanks for replying and definitely Ill look into further tuning
Life is to short to run without BOOST !!!!!
Post Reply