I'm looking for a certain tuned B20z basemap.
- intake to V stack
- 68mm throttle body
- port matched LS manifold
- 4-1 header
- oem cat
- 2.5 catback exhaust
Its currently running on the stock B20 calibration.
Had the car dynoed just to see where it was at for a stock motor with bolt-ons and it made 143hp and 130tq.
I'm currently using the oem fuel rail and injectors but i have an AEM fuel rail and 440's that I'm planning to install when I go vtec. My A/F ratio is in the 11's when idling and drops to 10's when I give it gas.
Does anyone have a tuned map with bolt ons similar to what I have and A/F ratio of 13.1/13.2?
thanks for looking
looking for a B20z basemap with 13.1/13.2 A/F
Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
-
- Posts: 1
- Joined: Wed Oct 10, 2018 7:54 am
Jump to
- General
- ↳ Hondata News
- ↳ Applications
- ↳ Non-Hondata
- s100/s200/s300
- ↳ s300 / SManager
- ↳ S300 Calibrations
- ↳ SManager Display Templates
- ↳ s100/s200
- ↳ Romeditor 4 Software
- ↳ HondaLogger Software
- ↳ Coil Pack Retrofit
- K-Series
- ↳ K-Pro / KManager
- ↳ K-Pro Calibrations
- ↳ KManager Display Templates
- ↳ K-Series Reflash
- FlashPro
- ↳ FlashPro Manager
- ↳ FlashPro Calibrations
- ↳ Accord 2008+ FlashPro
- ↳ Civic Si 2006-2011 Americas
- ↳ Civic Si 2012-2015 US/Canadian / 2013+ ILX
- ↳ Civic Type R 2006-2010 Japanese FD2
- ↳ Civic Type R 2007-2011 European FN2
- ↳ Civic Type R 2015+
- ↳ Civic 2016+ 1.5 Turbo Americas/Asia
- ↳ CRV 2017+
- ↳ CR-Z 2010-2012 US/Europe/Asia
- ↳ Fit 2007-2008
- ↳ RDX 2007-2012
- ↳ S2000 2006-2009 Americas/Europe/Asia
- ↳ TL 2007-2008
- ↳ TSX 2004-2014
- Traction Control
- ↳ General / Traction Control Manager Software
- ↳ Traction Control with S300
- ↳ Traction Control with KPro
- ↳ Traction Control with FlashPro
- Bluetooth Mobile Apps
- ↳ Hondata Mobile