Need a basemap for built b20 vtec

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
zero101
Posts: 2
Joined: Mon May 04, 2015 1:31 pm

Need a basemap for built b20 vtec

Post by zero101 »

Port and polish b16 head
84.5mm 13:1 Pistons
Skunk2 pro2 cam
1000cc Id injectors
Skunk2 ultra street manifold with 70mmtb
Smsp header
On e85
Stock .30 headgasket
Obd1 eg chassis

Really need this basemap!!! Thanks!
hpmx18
Posts: 212
Joined: Tue Feb 17, 2009 6:47 am
Location: U.S.A

Re: Need a basemap for built b20 vtec

Post by hpmx18 »

load the b20 map and change the injectors size to 1k and add bout 40% to the fuel map for the compression difference and e85 and you'll have to do some adjustments to get the idle correct on pro2 cams but its pretty easy once car is started and good afr if you have a wideband
LGMotoring
IG:Lgmotoring
Lgmotoring.com
zero101
Posts: 2
Joined: Mon May 04, 2015 1:31 pm

Re: Need a basemap for built b20 vtec

Post by zero101 »

@hpmx18 thank you, hondata already has a basemap for b20?
Post Reply