need basemap for b16a

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
redturbo0
Posts: 1
Joined: Tue Feb 10, 2015 8:41 pm

need basemap for b16a

Post by redturbo0 »

70mm tb
aftermarket intake manifold
header
no cat

but not that it really matters, anyways, stock injectors, I'd like vtec set at 4800 with a shift light set at 8000 and a redline of 8200. Also two-step set at 4500 please. knock sensor disabled as well.
cam6222
Posts: 18
Joined: Sat Feb 21, 2015 10:42 pm
Location: malaysia
Contact:

Re: need basemap for b16a

Post by cam6222 »

redturbo0 wrote:70mm tb
aftermarket intake manifold
header
no cat

but not that it really matters, anyways, stock injectors, I'd like vtec set at 4800 with a shift light set at 8000 and a redline of 8200. Also two-step set at 4500 please. knock sensor disabled as well.
hi red turbo,
look for this attachment.
B16a with 70mm tb.skl
(35.23 KiB) Downloaded 135 times
The open ur smanager to change the vtec open, shift light, rev cut, launch control. For disable the sensor.
Open your Smanager. Go to parameters -> miscelaneous and tick disable knock sensor.
Mrs Autoparts @ Honda Parts Malaysia
Post Reply