B18c4/B18c1 block B16 head Turbo Basemap

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
morgan100
Posts: 2
Joined: Fri Dec 12, 2014 12:07 am

B18c4/B18c1 block B16 head Turbo Basemap

Post by morgan100 »

Looking for a good base map to get my build running and drive it to get tuned.

-B18c4 block, stock internals (B18c1/GSR engine in the states)
-B16a2 head
-B18c4/GSR cams
-57 trim T3/T04E .50 A/R compressor .63 A/R exhaust
-Blox Cast manifold
-Tial 38mm Wastegate (0.6Bar/8.7Psi Spring)
-560cc Evo5 Injectors
-Walbro 255
-Racetech 3Bar map sensor
-2.5'' Exhaust

Any help with this is greatly appreciated
hpmx18
Posts: 212
Joined: Tue Feb 17, 2009 6:47 am
Location: U.S.A

Re: B18c4/B18c1 block B16 head Turbo Basemap

Post by hpmx18 »

use the preloaded map and adjust afr on idle and map and should b good from there
LGMotoring
IG:Lgmotoring
Lgmotoring.com
Southern_hustle
Posts: 1
Joined: Wed Mar 04, 2015 11:54 am

Re: B18c4/B18c1 block B16 head Turbo Basemap

Post by Southern_hustle »

try this tune a little tweakin should be good change ijector size im runnin 1000cc rc injectors with precision turbo graddy wasdtegate n blow off valve 10psi p28 s300v3 supertech valvetrane with itr cams and lsd typr r trans b16A2
Attachments
test tune b16a2 turbo rc1000cc.skl
(40.72 KiB) Downloaded 537 times
Post Reply