Looking for H22A turbor Map at 8psi, and another questions
-
- Posts: 16
- Joined: Mon Aug 03, 2009 8:49 am
Looking for H22A turbor Map at 8psi, and another questions
I'm looking for H22A turbo map, 8psi for now , 510cc injectors.
or recommendation to edit current Maps for H22.
The car will be finished next week to first start with boost and Hondata.
some details
Forged Ross Pistons (low compression)
Stock Rods
Stock sleeves
510cc injectors (from Mitsubishi Evolution)
(question for boost guru's, how much psi I can boost? without blow the engine)
thanks in advanced.
Saludos from Panama City
or recommendation to edit current Maps for H22.
The car will be finished next week to first start with boost and Hondata.
some details
Forged Ross Pistons (low compression)
Stock Rods
Stock sleeves
510cc injectors (from Mitsubishi Evolution)
(question for boost guru's, how much psi I can boost? without blow the engine)
thanks in advanced.
Saludos from Panama City
Honda Club Panama
Corrperformance Tuning
Panama
Corrperformance Tuning
Panama
Re: Looking for H22A turbor Map at 8psi, and another questi
More info needed. when referring to F/I, you need to think of things in terms of CFM not PSI.gherrera06 wrote:
(question for boost guru's, how much psi I can boost? without blow the engine)
For example, a t25 at 20 psi is no where near a GT42 at 20 psi, don't you agree?
-
- Posts: 53
- Joined: Sun Jun 29, 2008 5:08 pm
- Location: ON,Canada
-
- Posts: 16
- Joined: Mon Aug 03, 2009 8:49 am
Re: Looking for H22A turbor Map at 8psi, and another questi
ah! ...ok I going to detail the mods.diSTiNCt wrote:More info needed. when referring to F/I, you need to think of things in terms of CFM not PSI.gherrera06 wrote:
(question for boost guru's, how much psi I can boost? without blow the engine)
For example, a t25 at 20 psi is no where near a GT42 at 20 psi, don't you agree?
H22A JDM Engine
510cc Injectors
68mm Throttle Body, stock intake manifold with second butterflies
Skunk2 Cam gears
OEM JDM SIR camshats
PLX o2 WideBand sensor (connected to Hondata)
Fuel Regulator at 45psi
255lph Walbro Fuel Pump
2.5" exahust catback with Mugen Tween loop muffler (enough diameter for turbo application?)
Hybrid T3/T4 Turbocharger
.50 A/R compressor housing
.63 A/R Turbine housing
35mm Tial wastegate
SSQV Hks Blow Off
Hondata s300 Moduled P28
IAT relocation
MAP sensor spacer to fix read of boost over 12psi ( really I don't know if it works, y gonna test it)
Maybe I forgot something but the important things are listed, what u thinks guys?
saludos
Last edited by gherrera06 on Sun Dec 20, 2009 8:28 pm, edited 1 time in total.
Honda Club Panama
Corrperformance Tuning
Panama
Corrperformance Tuning
Panama
-
- Posts: 16
- Joined: Mon Aug 03, 2009 8:49 am
The Ross pistons come with forged rings, stock things are Rods and Sleeves, 400hp sound great...above I list the mods.megomaniac wrote:pistons ring lands were the weak point on the stock pistons. stock was good for like 300hp for a while. crank up the boost and let 'er rip. Id say 400hp with ur setup, on premium. need a wide band, dyno tune blah blah blah.......
thanks guy
Honda Club Panama
Corrperformance Tuning
Panama
Corrperformance Tuning
Panama
-
- Posts: 16
- Joined: Mon Aug 03, 2009 8:49 am
Already start the car yesterday, is very rich know, I'm running hondata with tuned based map for N/A. What I need to know now about Hondata setting for turbo system?
I mean for example, upload another calibration or just change base map for turbo only, I don't know tthe timing for this setting, N/A was 16 degree.
Waiting for u comments.
(Feliz Navidad y prospero año nuevo para todos! / Merry Christmas and Happy New Year for everyone!)
I mean for example, upload another calibration or just change base map for turbo only, I don't know tthe timing for this setting, N/A was 16 degree.
Waiting for u comments.
(Feliz Navidad y prospero año nuevo para todos! / Merry Christmas and Happy New Year for everyone!)
Honda Club Panama
Corrperformance Tuning
Panama
Corrperformance Tuning
Panama
-
- Posts: 38
- Joined: Sat Oct 28, 2006 7:27 pm
-
- Posts: 16
- Joined: Mon Aug 03, 2009 8:49 am
Very cool numbers!snwbrdrx19 wrote:those 510 injectors will b ur weak point. i have the same setup as u with 550's and i had to stop at 11psi due to the injectors being at 95% duty cycle. i dynoed 326whp@11psi on same turbo
Please can u post ur calibration!
after turbo install I'm having some problem with engine temp, I think is something related to calibration setting.
Attached u will find my current calibration and datalog for ur comments.
- Attachments
-
- datalogAccordTurbo09ENE2010.s3d
- (1.01 MiB) Downloaded 494 times
-
- Accordturbo510ccPanama.skl
- (33.15 KiB) Downloaded 588 times
Honda Club Panama
Corrperformance Tuning
Panama
Corrperformance Tuning
Panama
-
- Posts: 38
- Joined: Sat Oct 28, 2006 7:27 pm
heres my calibration...it still has some ignition tuning to go but this will def get u up n running with a little tweaking due to the injector size differences
- Attachments
-
- New Motor2.skl
- (35.09 KiB) Downloaded 718 times
-
- Posts: 38
- Joined: Sat Oct 28, 2006 7:27 pm
-
- Posts: 16
- Joined: Mon Aug 03, 2009 8:49 am
snwbrdrx19 wrote:just checked out ur map...u have heavy crossing of line on both fuel and ignition. also the ignition is very unsteady...i def think once u change my maps to 510cc u should b set. then some fine tuning adjustments need to made...but i think u will def find a huuuuge diff running my map
I 'll test the map tomorrow morning, just some questions, what about fuel presure and set timing??
Thanks!
Honda Club Panama
Corrperformance Tuning
Panama
Corrperformance Tuning
Panama
-
- Posts: 38
- Joined: Sat Oct 28, 2006 7:27 pm
-
- Posts: 38
- Joined: Sat Oct 28, 2006 7:27 pm