s200 tune got erased??

Hondata installation questions / answers / issues.
Locked
flip1199
Posts: 43
Joined: Sat Mar 15, 2003 1:10 pm

s200 tune got erased??

Post by flip1199 »

Ok so i got my car partially tuned in april. shortly after that i had to pull the head and change the head gasket because my head studs backed out. car was sitting up until last week when i put it back together. i slap the head on on and go to start it and it barely idle's. A/f is around 11:1-12.8:1 at idle. also now it doesnt want to rev past 2k rpms. Prior to me pulling the head it idled around 15:1. could the tune have gotten erased?
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

Were there any error codes? Since there has been major mechanical work done i would suspect a wiring, sensor or mechanical problem. The chip will not erase itself just sitting.
flip1199
Posts: 43
Joined: Sat Mar 15, 2003 1:10 pm

Post by flip1199 »

well only thing that was done was a head removal. intake manifold stayed in the car and connected. just unbolted the intake mani/exhuast mani, and unplugged like 5 connecters. i went over all the wiring and vacuum connections and it all checks out fine. No check engine lights either.
Locked