Hi,
I am running twm ITBs on my b18c5. The TWM setup comes with its own tps. Is there any way to calibrate the throttle range? Because right now at full closed the tps reads 26%
Also anyone have a base map for an ITB setup?
Thanks in advance.
Help with TWM ITB setup..
Help with TWM ITB setup..
Hassan
B18C5-EF
S300, ITBs etc...
B18C5-EF
S300, ITBs etc...
Make sure you are reading throttle percentage with the engine running. Just having the ignition on, and connected, the default percentage is 26 percent. Or the most accurate way to set the TPS is use a multimeter. With the ignition on, ground one probe to the chassis and probe the signal wire with the other lead, it should read .5 volts closed, 4.5 open, good luck.