Starting from scratch a few questions

s300 and SManager software questions & answers
Locked
gforceinteg
Posts: 23
Joined: Sat Sep 10, 2005 8:57 pm

Starting from scratch a few questions

Post by gforceinteg » Sun Sep 25, 2005 8:17 am

I was trying to use a s200 converted .bin but am having to much trouble.

I have 97 gsr with p28 ecu. Should I use the usdm p72 base to start or the p28?

also using 750cc saturated, how well does the s300 convert from injector size?

Also, anyone know what wideband comes in the rsx and is can use it with the s300?

User avatar
Spunkster
Site Admin
Posts: 17940
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Mon Sep 26, 2005 9:55 am

What base map you start with will depend on what engine you have. The injectors size adjustment will get you pretty close, but you will need to fine tune as all injectors have different characteristics. The RSX o2 sensor cannot be used as there is no controller for it. The PLX wideband is highly recommended.

Locked