S300v3 Repair

s300 and SManager software questions & answers
Post Reply
7rrivera7
Posts: 130
Joined: Wed Nov 13, 2002 3:01 pm

S300v3 Repair

Post by 7rrivera7 »

Customer brought me his ECU with S300 for repair stating that he accidently mis-connected his wideband to the analog inputs. The S300 has visible damage and I need the cost of repair or replacement of S300 board. I've attached pics showing the serial number and the damage. I am also in Puerto Rico USA.
IMG_20210307_170545.jpg
IMG_20210307_170545.jpg (3.18 MiB) Viewed 1068 times
IMG_20210307_170530.jpg
IMG_20210307_170530.jpg (3.84 MiB) Viewed 1068 times
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: S300v3 Repair

Post by Hondata »

From experience if the burnt components are replaced and the tracks are repaired then it still will not work - obviously a lot of current was involved. So replacement.

Contact support@hondata.com with a link to this thread.
Hondata
7rrivera7
Posts: 130
Joined: Wed Nov 13, 2002 3:01 pm

Re: S300v3 Repair

Post by 7rrivera7 »

Ok I just sent the email. Thanks for the info!
7rrivera7
Posts: 130
Joined: Wed Nov 13, 2002 3:01 pm

Re: S300v3 Repair

Post by 7rrivera7 »

Hello I sent the email to support@hondata.com several days ago but have not received a response.
User avatar
Spunkster
Site Admin
Posts: 22742
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: S300v3 Repair

Post by Spunkster »

Check your junk or spam folder as we did reply to your email.
Post Reply