S300 problem

s300 and SManager software questions & answers
Post Reply
henry.lo3
Posts: 1
Joined: Sat Aug 01, 2020 3:54 pm

S300 problem

Post by henry.lo3 »

Hi, I have a P06 with S300 installed. I have removed the Pin J12 but I’m still not getting a datalog reading on my ecu. Onboard datalog is off, I also have a CEL on with no code. My S manager is version 2.7.3.0
Attachments
14D9A7DF-7676-488A-8D90-944E72B09626.jpeg
14D9A7DF-7676-488A-8D90-944E72B09626.jpeg (2.94 MiB) Viewed 2476 times
3B70C973-05D8-4E7B-9E2E-CE8E60B8670B.jpeg
3B70C973-05D8-4E7B-9E2E-CE8E60B8670B.jpeg (3.58 MiB) Viewed 2476 times
E46035CA-1C0C-4814-83DD-4311E91EA8DE.jpeg
E46035CA-1C0C-4814-83DD-4311E91EA8DE.jpeg (2.95 MiB) Viewed 2476 times
9C5436A1-DD4B-4725-AF4F-F851D02CDC11.jpeg
9C5436A1-DD4B-4725-AF4F-F851D02CDC11.jpeg (3.31 MiB) Viewed 2476 times
Top
User avatar
Spunkster
Site Admin
Posts: 22798
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: S300 problem

Post by Spunkster »

Your software is out of date, and the soldering on the 14 pin connectors looks sketchy. You may have damaged the through hole plating and it may not have any connection.
Top
Post Reply

Return to “s300 / SManager”